Cell phone to complete the registration on the SDCCH. In Slow Associated Control Channel (SACCH) on the issue control instructions. And then cell phone to idle, and monitor control channel BCCH and CCCH information on the public. At this point do the paging cell phone preparation. Users to monitor BCCH must be made with a similar base station synchronization. By receiving the FCCH, SCH, BCCH information, the user will be locked into the system and appropriate on the BCCH. We consider the GSM system in the case of a call by the cell phone. First, the user in monitoring BCCH must be made with a similar base station synchronization. The cell phone will appear situations of net searching, no-signal, no-service system and so on ifcell phone jammer is used.
By receiving the FCCH, SCH, BCCH information, the user will be locked into the system and appropriate on the BCCH. To place a call, users must first dial, and press the launch button on the GSM cell phone. Locking its cell phone base station system ARFCN to transmit RACH data burst sequence. On CCCH and the base station to the AGC information to respond to, CCCH for the cell phone to specify a new channel for SDCCH connection. BCCH in TS0 is monitoring the user, it received from the AGCH ARFCN and TS arrangements, and immediately go to the new ARFCN and TS, and this new ARFCN and TS distribution is SDCCH (not TCH). 3G signal is also shielded bycell phone jammer.
Once transferred to SDCCH, the user first passed its SACCH frame waiting (waiting for the maximum sustained 26 or 129ms). The frame message to the cell phone asks for the amount of timing advance and transmit power. RACH according to cell phone base station before transmitting data to determine the appropriate amount of timing advance and power level, and sends the appropriate data through the SACCH for mobile processing. SACCH is received and processed in the amount of timing advance information, the user can send a normal voice services required by the unexpected sequence information. When connected to the PSTN from dial-MSC, and MSC will be the voice path to access the base station, SDCCH check the legality and validity of the user, then the messages sent between cell phones and base stations. cell phone jammer only shields downward frequency of base station.
After a few seconds, this cell phone base station re-turned by a SDCCH to TCH ARFCN arrangements and TS. Once again received TCH, the voice signal on the forward and reverse link transmission, the call successfully established, SDCCH be vacated. When a call from the PSTN when the process is similar to the process. Base station in the appropriate frame of TS0 BCCH during a PCH message is broadcast. Lock on the same ARFCN detect it on the cell phone paging, and respond to a RACH message to confirm receipt of paging. When the network connection and service base, the base station on the AGCH CCCH cell phone assigned to a new physical channel to connect SDCCH and SACCH. cell phone jammer has no harm to the human health.
Once established on the SDCCH, and allowed to confirm the amount of time in advance, the base station on the SDCCH channel re-allocation of physical, but also established the allocation of TCH. Off, press the key to open the keyboard to digital detection module sends a shutdown request to the logical part of the signal, CPU power is withdrawn to maintain the signal, shutdown procedures, withdrawal of power supply modules, RF and logic circuits that stop working, so shut down. If turned on, forced off (remove the battery) may cause internal software fault. It also includes other software workflow processes such as charging, the battery detection, keyboard scan, test processes. cell phone jammer has the slow-starting circuit design.
Monday, January 30, 2012
Saturday, January 28, 2012
Cell phone jammer can be used in various locations
Digital TV market development potential, while the analog mobile TV have begun widespread attention, attracted a number of chip makers to join, in addition to the Thai King, it is learned, Rockchip, RDA, Creative Video, Montage Technology is also actively R & D related products. It is foreseeable that the next few years, analog mobile TV will become a hot spot. In addition, the local IC manufacturers support the CMMB and analog TV dual-mode products may have to play. 3G multimedia driven handset to change the wireless Internet, audio, video, image processing needs increase. Thecell phone jammersystem has the real time inquiry function.
Future capacity of the smart cell phone market in the Asia-Pacific IC market, the tremendous growth the past few years, reflecting the production of electronic systems and the shift to the Asia-Pacific region, especially to China. In general, regional IC market growth in the region usually associated with increased production of electronic systems to match. In anticipation of more global electronics production in the Asia-Pacific (excluding Japan), especially in China, IC Insights that the Asia-Pacific IC market growth rate will continue to significantly exceed the overall IC market, so at least the next five years. In 2009, China and Taiwan is expected to total IC market in Asia Pacific is expected to account for about 75%. IC Insights forecasts that by 2013 IC market in China and Taiwan will total approximately $ 139 billion, accounting for the overall IC market in the Asia-Pacific 80%, half of the global IC market (48%) .008 years. The real time inquiry function of thecell phone jammersystem is very convenient for the management personnel.
China's IC market grew 5% to $ 56.2 billion, while the current global IC market fell 6 percent overall. Although China's IC market in 2009 is expected to decline 8%, but the performance is expected to remain well above 17% of the overall IC market. In addition, China's IC market is expected CAGR 2008-2013 of 12%, which is twice the global IC market over the same period. China's IC market will be over $ 100 billion in 2013 and now the biggest obstacle to the development of 3G services is believed that China Mobile and China Telecom will be answered 3G mobile terminals, the 3G industry is quite "everything is ready, just waiting for the terminal," the taste. Obviously this operator in China, "has broken the heart." Thecell phone jammer system has the various and powerful functions.
Ping, general manager of China Telecom is in the public formal occasions stormed the domestic 3G handset provider, accusing it of supporting poor; forced a strong guide and support China Mobile called "cottage" father MediaTek join TD industrial chain to more quickly to mature and to promote TD-SCDMA terminals, etc. All this can be seen as the domestic cell phone "troubles" a true portrayal. China's domestic cell phone industry is not only facing internal problems, as well as foreign aggression. Indian government has announced a ban on the import of all non-international shift basis, but also in the low-end market is continually gaining ground and reap market opportunities. Nokia some time ago and some of its domestic distributors against is its strong example of the era of King in the channel. The customer should complete the payment of cell phone jammer according to the stipulation described in the note.
What other cell phone manufacturers will be in such efforts to rectify its channel system? At least domestic cell phone manufacturers are simply not able to do so. By comparison, many cell phone manufacturers in China, they are basically the first to enter the low-end market, but still mostly fought on the market, one of the few killer magic is simple imitation and competition and low prices, they simply no desire to even aware enough to end up with a positive potential energy. Mobile equipment identifier of the cell phone, which will greatly affect the body in order to reduce costs and not made cottage yard sales in India. The operating mode of cell phone jammer system can be selected.
Future capacity of the smart cell phone market in the Asia-Pacific IC market, the tremendous growth the past few years, reflecting the production of electronic systems and the shift to the Asia-Pacific region, especially to China. In general, regional IC market growth in the region usually associated with increased production of electronic systems to match. In anticipation of more global electronics production in the Asia-Pacific (excluding Japan), especially in China, IC Insights that the Asia-Pacific IC market growth rate will continue to significantly exceed the overall IC market, so at least the next five years. In 2009, China and Taiwan is expected to total IC market in Asia Pacific is expected to account for about 75%. IC Insights forecasts that by 2013 IC market in China and Taiwan will total approximately $ 139 billion, accounting for the overall IC market in the Asia-Pacific 80%, half of the global IC market (48%) .008 years. The real time inquiry function of thecell phone jammersystem is very convenient for the management personnel.
China's IC market grew 5% to $ 56.2 billion, while the current global IC market fell 6 percent overall. Although China's IC market in 2009 is expected to decline 8%, but the performance is expected to remain well above 17% of the overall IC market. In addition, China's IC market is expected CAGR 2008-2013 of 12%, which is twice the global IC market over the same period. China's IC market will be over $ 100 billion in 2013 and now the biggest obstacle to the development of 3G services is believed that China Mobile and China Telecom will be answered 3G mobile terminals, the 3G industry is quite "everything is ready, just waiting for the terminal," the taste. Obviously this operator in China, "has broken the heart." Thecell phone jammer system has the various and powerful functions.
Ping, general manager of China Telecom is in the public formal occasions stormed the domestic 3G handset provider, accusing it of supporting poor; forced a strong guide and support China Mobile called "cottage" father MediaTek join TD industrial chain to more quickly to mature and to promote TD-SCDMA terminals, etc. All this can be seen as the domestic cell phone "troubles" a true portrayal. China's domestic cell phone industry is not only facing internal problems, as well as foreign aggression. Indian government has announced a ban on the import of all non-international shift basis, but also in the low-end market is continually gaining ground and reap market opportunities. Nokia some time ago and some of its domestic distributors against is its strong example of the era of King in the channel. The customer should complete the payment of cell phone jammer according to the stipulation described in the note.
What other cell phone manufacturers will be in such efforts to rectify its channel system? At least domestic cell phone manufacturers are simply not able to do so. By comparison, many cell phone manufacturers in China, they are basically the first to enter the low-end market, but still mostly fought on the market, one of the few killer magic is simple imitation and competition and low prices, they simply no desire to even aware enough to end up with a positive potential energy. Mobile equipment identifier of the cell phone, which will greatly affect the body in order to reduce costs and not made cottage yard sales in India. The operating mode of cell phone jammer system can be selected.
Thursday, January 26, 2012
Cell phone jammer equal to a base station in function and covering range
The merit of signal repeater contains the following compared with the base station:
1. Taking the same covering area into account, the investment of signal repeater will be lower. In the plain area, an outdoor omnidirectional base station has the covering radius of 10km. An omnidirectional signal repeater has the covering radius of 4km. For the covering area, six cell phone jammer equal to a base station in function and covering range.
The equipment cost of six signal repeaters is about 80% of that of a base station. However, if the cost and expense of rent and decoration of machine room, DC and AC power supply, air conditioner, transmission system and circuit rent and so on are taken into account, cost of six signal repeaters is only half of that of a base station or even lower.
2. The covering of signal repeater is more flexible. The base station is basically the round shape covering. Several signal repeaters can form various covering modes. For example, the line-type layout of signal repeater can cover tens of kilometers. And at the same time, the L-type, N-type and M-type covering can be formed, especially suitable to network in remote area.
3. In the initial stage of network building, some cell phone jammer can be used to replace the base station for the user is not much and the investment benefit is not good. After the user is getting more and more, the signal repeater can be replaced by the base station. The replaced signal repeater can be placed in the more remote area.
4. The civil engineering and construction of transmission circuit is not needed so the net building is rapid.
1. The capacity of the system can not be added.
2. After the signal repeater has been installed, the noise of more than 3dB will be added to the base station which will worsen the working environment of the base station and decrease the covering radius. Therefore, only two signal repeaters or below can be installed in a sector of a base station.
3. Only the frequency division can be performed to the signal repeater but the code division can not be performed to the signal repeater. A signal repeater will amplify the signal of several base stations or several sectors.
If too many signal repeaters are installed, the phase confusion of short code of base station can be caused and serious pilot frequency pollution will be caused. The optimization work will be difficult and the unnecessary soft switching will be increased.
1. Taking the same covering area into account, the investment of signal repeater will be lower. In the plain area, an outdoor omnidirectional base station has the covering radius of 10km. An omnidirectional signal repeater has the covering radius of 4km. For the covering area, six cell phone jammer equal to a base station in function and covering range.
The equipment cost of six signal repeaters is about 80% of that of a base station. However, if the cost and expense of rent and decoration of machine room, DC and AC power supply, air conditioner, transmission system and circuit rent and so on are taken into account, cost of six signal repeaters is only half of that of a base station or even lower.
2. The covering of signal repeater is more flexible. The base station is basically the round shape covering. Several signal repeaters can form various covering modes. For example, the line-type layout of signal repeater can cover tens of kilometers. And at the same time, the L-type, N-type and M-type covering can be formed, especially suitable to network in remote area.
3. In the initial stage of network building, some cell phone jammer can be used to replace the base station for the user is not much and the investment benefit is not good. After the user is getting more and more, the signal repeater can be replaced by the base station. The replaced signal repeater can be placed in the more remote area.
4. The civil engineering and construction of transmission circuit is not needed so the net building is rapid.
1. The capacity of the system can not be added.
2. After the signal repeater has been installed, the noise of more than 3dB will be added to the base station which will worsen the working environment of the base station and decrease the covering radius. Therefore, only two signal repeaters or below can be installed in a sector of a base station.
3. Only the frequency division can be performed to the signal repeater but the code division can not be performed to the signal repeater. A signal repeater will amplify the signal of several base stations or several sectors.
If too many signal repeaters are installed, the phase confusion of short code of base station can be caused and serious pilot frequency pollution will be caused. The optimization work will be difficult and the unnecessary soft switching will be increased.
Tuesday, January 24, 2012
Cell phone jammer needs the careful maintenance
HDI PCB is mainly used for mobile phones, digital cameras, digital cameras, notebook computers, high-end computers, network communications, automotive electronics and other products, including mobile phones as the largest HDI PCB applications. As the mobile cell phoneassembly space is limited, and short, light product constraints imposed on the thickness, HDI board has become a mobile structural element most commonly used materials. Figure 12 HDI board the main application areas Source: Founder Securities Research Center now, because 90% of the mobile plate are drawn HDI boards, therefore, the mobile terminal industry growth driven by HDI PCB's total demand continues to grow. Thecell phone jammerfactory has improved the technology to reduce the rework rate of cell phone jammer.
Domestic mobile cell phoneproduction in 2009 is expected to reach about 640 million, according to the current 90% of mobile cell phoneuse of HDI boards, "one square meter HDI board about supporting 180 mobile phone" can be calculated with China Mobile in 2009, HDI board market demand 3.2 million square meters [(6.4 * 90%) * 10000/180], in the absence of data from 11 studies to create the depth of the value of the mobile terminal industry reports a few years will maintain growth, the company will continue to benefit domestic-related. The popularity of camera phones 3G era brings IR-cut filter on the huge demand for camera phones since 2004, mass market, along with the continued strengthening of mobile entertainment features, global shipments of camera phones is increasing, accounting for the proportion of the global handset shipments are increasing in 2008 and more than 800 million, accounting for 70% or more. The test data sheet ofcell phone jammershould be renewed.
By 2010 the global camera cell phoneshipments will reach more than 1.1 billion, accounting is expected to reach 80%. Since the camera function has gradually become a standard feature cell phonehas a camera cell cell phonecamera as an important optical components, infrared cut filter on the global market. The depth of the mobile terminal industry has reported growing demand. On the other hand, while the consumer camera cell phoneimages for greater clarity, hope has a higher pixel camera function. By contrast, IR-cut filter and more segments of the product mix, match the requirements of high-pixel imaging CCD, CMOS IR cut filter demand more robust, IR cut filter will be needed the main growth. China-related companies will continue to benefit. Some shareholders are also worried about the investment risk of cell phone jammer.
3G mobile users to ensure the continued growth of sustainable earnings SIM card SIM card manufacturers (Subscriber Identity Module) that the user identity module, the module can be said that mobile cell phoneusers of functional entities, including all user data, especially the process of identifying users and and user-related information. Over the years, China's mobile cell phoneusers continue to increase rapidly in 2009, 1-4 months, the cumulative net increase of mobile cell phoneusers, 37.572 million, the current total number of users reached 679 million. Central and western regions, especially mobile cell phonepenetration rate is low, new mobile cell phoneusers has maintained rapid growth momentum. Thus, the domestic SIM card manufacturers will continue to benefit in the coming years. Especially the three major telecom operators launched their 3G services, will provide a new SIM card market development opportunities. Test result of cell phone jammersample is good enough.
At present, China Mobile's TD-SCDMA users now have more than one million, three years and strive to develop about 50 million users; Meanwhile, China Telecom 3G network card has sold 1 million or more, 3G cell cell phone100 000, 3G netbooks 30000 multiple, based on the 3G platform will rapidly develop a new generation of SIM cards, and the formation of larger market size. Mobile cell phonedisplay manufacturers will face a major development opportunities 3G mobile phone, from a technical point of view, with the first generation analogue and second-generation GSM mobile phones and other 2G phones than more is the data processing and transmission in different formats. The profit of sellingcell phone jammeris large.
Domestic mobile cell phoneproduction in 2009 is expected to reach about 640 million, according to the current 90% of mobile cell phoneuse of HDI boards, "one square meter HDI board about supporting 180 mobile phone" can be calculated with China Mobile in 2009, HDI board market demand 3.2 million square meters [(6.4 * 90%) * 10000/180], in the absence of data from 11 studies to create the depth of the value of the mobile terminal industry reports a few years will maintain growth, the company will continue to benefit domestic-related. The popularity of camera phones 3G era brings IR-cut filter on the huge demand for camera phones since 2004, mass market, along with the continued strengthening of mobile entertainment features, global shipments of camera phones is increasing, accounting for the proportion of the global handset shipments are increasing in 2008 and more than 800 million, accounting for 70% or more. The test data sheet ofcell phone jammershould be renewed.
By 2010 the global camera cell phoneshipments will reach more than 1.1 billion, accounting is expected to reach 80%. Since the camera function has gradually become a standard feature cell phonehas a camera cell cell phonecamera as an important optical components, infrared cut filter on the global market. The depth of the mobile terminal industry has reported growing demand. On the other hand, while the consumer camera cell phoneimages for greater clarity, hope has a higher pixel camera function. By contrast, IR-cut filter and more segments of the product mix, match the requirements of high-pixel imaging CCD, CMOS IR cut filter demand more robust, IR cut filter will be needed the main growth. China-related companies will continue to benefit. Some shareholders are also worried about the investment risk of cell phone jammer.
3G mobile users to ensure the continued growth of sustainable earnings SIM card SIM card manufacturers (Subscriber Identity Module) that the user identity module, the module can be said that mobile cell phoneusers of functional entities, including all user data, especially the process of identifying users and and user-related information. Over the years, China's mobile cell phoneusers continue to increase rapidly in 2009, 1-4 months, the cumulative net increase of mobile cell phoneusers, 37.572 million, the current total number of users reached 679 million. Central and western regions, especially mobile cell phonepenetration rate is low, new mobile cell phoneusers has maintained rapid growth momentum. Thus, the domestic SIM card manufacturers will continue to benefit in the coming years. Especially the three major telecom operators launched their 3G services, will provide a new SIM card market development opportunities. Test result of cell phone jammersample is good enough.
At present, China Mobile's TD-SCDMA users now have more than one million, three years and strive to develop about 50 million users; Meanwhile, China Telecom 3G network card has sold 1 million or more, 3G cell cell phone100 000, 3G netbooks 30000 multiple, based on the 3G platform will rapidly develop a new generation of SIM cards, and the formation of larger market size. Mobile cell phonedisplay manufacturers will face a major development opportunities 3G mobile phone, from a technical point of view, with the first generation analogue and second-generation GSM mobile phones and other 2G phones than more is the data processing and transmission in different formats. The profit of sellingcell phone jammeris large.
Sunday, January 22, 2012
The cell phone jammer system will develop faster
In fact, the earliest possible intervention Huawei Motorola business news from the acquisition in June 2009, research institutions, Oppenheimer (Oppenheimer) analyst Itay ? Kidron (IttaiKidron) in a report that Motorola working with Huawei to sell its network equipment business to discuss the possibility. Motorola's network equipment business last year, sales of 80 billion U.S. dollars, down 21% in 2008. Operating profit, down 39%, to 5.58 billion U.S. dollars. 19 The reason why Huawei is considered the most likely potential buyers, because Huawei is trying to increase sales in North America. The customer also provides some important improvement suggestions ofcell phone jammersystem.
As is clearly difficult to open up the North American market than other markets, so the acquisition of North American companies to win the North American market as an important means. In 2009, in order to strengthen the performance of the North American market, Ericsson beat Nokia Siemens acquisition of Nortel's CDMA and LTE business unit, to the North American market share doubled. "Financial Times", said chief marketing officer KenHu Huawei, Huawei will consider all acquisition opportunities. When asked whether Huawei Motorola's network equipment business are interested in when, KenHu highlighted 3G equipment both in the partnership. He added: "We want to Huawei and Motorola continue to maintain good business relationship." The charger will be delivered together with the host ofcell phone jammer.
However, whether Motorola or Huawei are cautious about this transaction. In 2007, Huawei has joint Bain Capital for $ 2.2 billion acquisition of 3Com Corporation, however, the transaction is ultimately because of "political factors" did not receive U.S. government approval. Industrial enterprises in Shenzhen Huawei as the "boss" Sina science and technology industrial enterprises in Shenzhen last year, "top spot" who gets what? According to City Branch Trade and Industry Information Committee released yesterday hundred industrial enterprises list in 2009, Huawei became the first first time Foxconn. Reporters learned that, compared with last year, there are 16 hundred new enterprises to enter the industry, which over 60% of the electronics industry companies. Shenzhen Bureau of Trade and Industry Information and Statistics Committee data show that in 2009, Shenzhen scale industrial added value of 342.99 billion yuan above, an increase of 8.7% last year. Among them, the industry 859 billion yuan hundred main income, accounting for 58.3% of the city's revenues, profits and create up to 625 billion yuan, accounting for 72.7% of the size of industrial enterprises. The document for thecell phone jammersystem is confidential.
List of hundred companies selected are mainly based on a calculation of the annual output value of enterprises into the list of enterprises in the future will be the policy of the relevant government departments to support and facilitation services. March 11, according to foreign media reports, Lenovo CEO Yang Yuanqing said on Thursday, the association's goal is to become the market leader in China's mobile phone. Last year, Lenovo's buy-back of cell phone unit, re-enter the cell phone market. In this regard, Yang told Reuters in an interview Thursday, said Lenovo to become the market leader in China's mobile phone. Yang said, at least the next two years, mobile communication services will not bring much to the company's percentage of revenue. After all, Lenovo is currently faced with the task to win more market share. Yang said: "The mobile communications business is still in early stages of development, but with the international competitors, Lenovo to better understand the Chinese market. Chief Engineer hosted the meeting during which some technical details of cell phone jammer had been determined.
Our advantage is that the local distributors and retailers can build a better relationship. "Datang Telecom said 2010 layout and the transformation of things around the SAN News March 12, at the same time released the 2009 annual report of listed companies in 2010, Datang Telecom said the main objective is to focus on mobile Internet and networking , focused on building "great end to increase the service" industries. layout of things and the mobile Internet on March 11, Datang Telecom released annual report, 2009, Datang Telecom operating income of more than 3.21 billion yuan, net profit of 57.474 million yuan, an increase of 25.91%, while, Datang Telecom said in 2009 after large-scale network infrastructure in 2010, 3G will officially enter the domestic development of large-scale users and business operations period. For the factory gets much more orders of cell phone jammer, the factory needs more workers to accomplish all orders within the specified period.
As is clearly difficult to open up the North American market than other markets, so the acquisition of North American companies to win the North American market as an important means. In 2009, in order to strengthen the performance of the North American market, Ericsson beat Nokia Siemens acquisition of Nortel's CDMA and LTE business unit, to the North American market share doubled. "Financial Times", said chief marketing officer KenHu Huawei, Huawei will consider all acquisition opportunities. When asked whether Huawei Motorola's network equipment business are interested in when, KenHu highlighted 3G equipment both in the partnership. He added: "We want to Huawei and Motorola continue to maintain good business relationship." The charger will be delivered together with the host ofcell phone jammer.
However, whether Motorola or Huawei are cautious about this transaction. In 2007, Huawei has joint Bain Capital for $ 2.2 billion acquisition of 3Com Corporation, however, the transaction is ultimately because of "political factors" did not receive U.S. government approval. Industrial enterprises in Shenzhen Huawei as the "boss" Sina science and technology industrial enterprises in Shenzhen last year, "top spot" who gets what? According to City Branch Trade and Industry Information Committee released yesterday hundred industrial enterprises list in 2009, Huawei became the first first time Foxconn. Reporters learned that, compared with last year, there are 16 hundred new enterprises to enter the industry, which over 60% of the electronics industry companies. Shenzhen Bureau of Trade and Industry Information and Statistics Committee data show that in 2009, Shenzhen scale industrial added value of 342.99 billion yuan above, an increase of 8.7% last year. Among them, the industry 859 billion yuan hundred main income, accounting for 58.3% of the city's revenues, profits and create up to 625 billion yuan, accounting for 72.7% of the size of industrial enterprises. The document for thecell phone jammersystem is confidential.
List of hundred companies selected are mainly based on a calculation of the annual output value of enterprises into the list of enterprises in the future will be the policy of the relevant government departments to support and facilitation services. March 11, according to foreign media reports, Lenovo CEO Yang Yuanqing said on Thursday, the association's goal is to become the market leader in China's mobile phone. Last year, Lenovo's buy-back of cell phone unit, re-enter the cell phone market. In this regard, Yang told Reuters in an interview Thursday, said Lenovo to become the market leader in China's mobile phone. Yang said, at least the next two years, mobile communication services will not bring much to the company's percentage of revenue. After all, Lenovo is currently faced with the task to win more market share. Yang said: "The mobile communications business is still in early stages of development, but with the international competitors, Lenovo to better understand the Chinese market. Chief Engineer hosted the meeting during which some technical details of cell phone jammer had been determined.
Our advantage is that the local distributors and retailers can build a better relationship. "Datang Telecom said 2010 layout and the transformation of things around the SAN News March 12, at the same time released the 2009 annual report of listed companies in 2010, Datang Telecom said the main objective is to focus on mobile Internet and networking , focused on building "great end to increase the service" industries. layout of things and the mobile Internet on March 11, Datang Telecom released annual report, 2009, Datang Telecom operating income of more than 3.21 billion yuan, net profit of 57.474 million yuan, an increase of 25.91%, while, Datang Telecom said in 2009 after large-scale network infrastructure in 2010, 3G will officially enter the domestic development of large-scale users and business operations period. For the factory gets much more orders of cell phone jammer, the factory needs more workers to accomplish all orders within the specified period.
Friday, January 20, 2012
Enhance the performance of the cell phone jammer
Wireless Handheld Cell Phone Jammer
This kind of cell phone jammer has the very special design so that it is well received in the market. Especially in these recent days, more and more customers are interested in this kind of cell phone jammer for it owns the special design which is the internal antenna. The cell phone jammer adopts the omnidirectional antenna which is not needed to be connected to the host of cell phone jammer for the antenna is the built-in type.
Every antenna is insulated from each other so that one antenna will not influence the other. Therefore, the cell phone jammer can work more efficiently. The antenna of the cell phone jammer adopts the first class material which is much suitable to produce antenna and which can greatly enhance the performance of the cell phone jammer.
This kind of cell phone jammer has some strict using requirements. The user should pay attention to the using and working condition of the cell phone jammer. The cell phone jammer should not be placed in the water or fire, which means that the cell phone jammer should not contact the water or fire whether it is working or not. The cell phone jammer should not be used in the bad conditions.
Over heat should be avoided when using the cell phone jammer and the over voltage, over current and over magnetism are also should be prevented so that the cell phone jammer can work better and more efficiently. And at the same time, the life time of cell phone jammer can be prolonged. Therefore, the proper maintenance and appropriate use method are very important to cell phone jammer.
The charging of cell phone jammer is also very important. If the cell phone jammer cannot be charged normally or some other abnormal situations appear, for example, the indication light of the charger does not light up, please feel free to contact with us as soon as possible. The random and incorrect refit and repair are not allowed.
This kind of cell phone jammer has the very special design so that it is well received in the market. Especially in these recent days, more and more customers are interested in this kind of cell phone jammer for it owns the special design which is the internal antenna. The cell phone jammer adopts the omnidirectional antenna which is not needed to be connected to the host of cell phone jammer for the antenna is the built-in type.
Every antenna is insulated from each other so that one antenna will not influence the other. Therefore, the cell phone jammer can work more efficiently. The antenna of the cell phone jammer adopts the first class material which is much suitable to produce antenna and which can greatly enhance the performance of the cell phone jammer.
This kind of cell phone jammer has some strict using requirements. The user should pay attention to the using and working condition of the cell phone jammer. The cell phone jammer should not be placed in the water or fire, which means that the cell phone jammer should not contact the water or fire whether it is working or not. The cell phone jammer should not be used in the bad conditions.
Over heat should be avoided when using the cell phone jammer and the over voltage, over current and over magnetism are also should be prevented so that the cell phone jammer can work better and more efficiently. And at the same time, the life time of cell phone jammer can be prolonged. Therefore, the proper maintenance and appropriate use method are very important to cell phone jammer.
The charging of cell phone jammer is also very important. If the cell phone jammer cannot be charged normally or some other abnormal situations appear, for example, the indication light of the charger does not light up, please feel free to contact with us as soon as possible. The random and incorrect refit and repair are not allowed.
Thursday, January 19, 2012
Cell phone jammer is widely used
Create a channel connection is mapped to the program. Cordless cell phoneconfiguration file (CTP). CTP defines how to implement a wireless link via Bluetooth cordless phone. This configuration file can be used for private cordless phones or neighboring base stations and the implementation of the CTP as a cordless cell phonehandset. Situation is expected to be: When at home, the cell phonecan be used to connect to a Bluetooth CTP gateway land line, and when out of range is used in mobile cell phonenetwork. In which two Bluetooth devices can exchange with acceptable quality and performance of the message area. cell phone jammer can performs the overall shielding for the GSM、CDMA cell cell phoneand PHS.
Including authentication and encryption, including the establishment of the connection process. The remote device is marked as trusted devices program. This includes storage for future authentication and pairing with a common link key (if no link key). Can be found on the device to retrieve from the Bluetooth device address, clock, device class field and paging scan mode using the program. DUN via Bluetooth wireless technology provides access to the Internet and other dial-up service standards. The most common situation is on the cell phonedial, from laptop computers to wirelessly access the Internet. cell phone jammer should be installed outdoors.
Can be found in the range of Bluetooth devices, which regularly monitor its inquiry scan physical channel and the channel response to a query request. Under normal circumstances, can be found in the device can be connected. Data encoding method, to prevent others decipher the information. Extended Service Discovery Profile (ESDP). ESDP defines how universal plug and play device via Bluetooth wireless connection is working. FAX profile defines how to use terminal equipment FAX gateway device. FAX aimed at mobile or fixed telecell phoneand fax software is installed between the PC interface to provide appropriate definitions. A typical personal computer is configured to use the cell phoneas a FAX gateway to send any FAX transmission recipient. Will cell phone jammer be switched off during the rest between classes?
FTP defines how to navigate the server, the client device on the device folders and files. Once the client to find a file or location, the client can pull files from the server, or push through GOEP file from the client to the server. General Audio / Video Distribution Profile (GAVDP). GAVDP to provide the basis for A2DP and VDP, the latter two are designed for use with Bluetooth wireless technology, distributed audio and video streaming system is based. In general use, similar to the "Walkman" and other similar devices can be used as the initiator, while the headset is as a receiver. cell phone jammer equips with the intelligent fast battery charger.
GAP is the basis for all other configuration file that defines the Bluetooth baseband link between devices to establish a common approach. This profile defines some common operations that refer to the GAP for the implementation of multiple configuration files and device configuration files. GAP ensures that two Bluetooth devices (regardless of manufacturer, and applications) can exchange information via Bluetooth technology to find each other support applications. Does not match any other Bluetooth profiles Bluetooth devices must comply with GAP to ensure basic interoperability and coexistence. cell phone jammer even contains the latest 3G service band.
Including authentication and encryption, including the establishment of the connection process. The remote device is marked as trusted devices program. This includes storage for future authentication and pairing with a common link key (if no link key). Can be found on the device to retrieve from the Bluetooth device address, clock, device class field and paging scan mode using the program. DUN via Bluetooth wireless technology provides access to the Internet and other dial-up service standards. The most common situation is on the cell phonedial, from laptop computers to wirelessly access the Internet. cell phone jammer should be installed outdoors.
Can be found in the range of Bluetooth devices, which regularly monitor its inquiry scan physical channel and the channel response to a query request. Under normal circumstances, can be found in the device can be connected. Data encoding method, to prevent others decipher the information. Extended Service Discovery Profile (ESDP). ESDP defines how universal plug and play device via Bluetooth wireless connection is working. FAX profile defines how to use terminal equipment FAX gateway device. FAX aimed at mobile or fixed telecell phoneand fax software is installed between the PC interface to provide appropriate definitions. A typical personal computer is configured to use the cell phoneas a FAX gateway to send any FAX transmission recipient. Will cell phone jammer be switched off during the rest between classes?
FTP defines how to navigate the server, the client device on the device folders and files. Once the client to find a file or location, the client can pull files from the server, or push through GOEP file from the client to the server. General Audio / Video Distribution Profile (GAVDP). GAVDP to provide the basis for A2DP and VDP, the latter two are designed for use with Bluetooth wireless technology, distributed audio and video streaming system is based. In general use, similar to the "Walkman" and other similar devices can be used as the initiator, while the headset is as a receiver. cell phone jammer equips with the intelligent fast battery charger.
GAP is the basis for all other configuration file that defines the Bluetooth baseband link between devices to establish a common approach. This profile defines some common operations that refer to the GAP for the implementation of multiple configuration files and device configuration files. GAP ensures that two Bluetooth devices (regardless of manufacturer, and applications) can exchange information via Bluetooth technology to find each other support applications. Does not match any other Bluetooth profiles Bluetooth devices must comply with GAP to ensure basic interoperability and coexistence. cell phone jammer even contains the latest 3G service band.
Wednesday, January 18, 2012
More research is needed for this type of cell phone jammer
With the EU Directive 89/336 EEC on 1 January 1996 entered into force (Note: The instructions were modified in the spring of this year), the United States, Japan, Australia and other countries and regions, governments have issued corresponding instructions, non-electromagnetic Compatibility does not meet their standard products into these countries and regions within the market or in production, so that the electromagnetic compatibility (and safety) mark the export product "passport."The letter on the package of cell phone jammer should be clear. My company has been in the export of telecommunications equipment to go in front of peers, the company's goal is to reach within a few years of international business share of 50%, so we work more to pay close attention to electromagnetic compatibility to carry out, can not afford to not work in this area place and influence the international market development. 3, electromagnetic compatibility problems if the early stages of product development is not fully considered, is not well-designed, once the product is formed, its probability of compliance is very small, and the difficulties to solve the problem, it takes manpower and costs will be very large. More research is needed for this type of cell phone jammer . These points must be in senior leadership awareness and understanding of, or promote electromagnetic compatibility work is almost not go. EMC design involves the circuit board, structure, cables, equipment, power systems and grounding systems and other aspects, is very complex, far-fetched at first glance seem to touch, in fact, through reasonable methods of work followed in the design and EMC design some basic guidelines, or may be subject to a multiplier effect. The following more specific about the product EMC design work content. In the product (including board) clearly stated in the specification of products designed to meet the electromagnetic compatibility requirements, the products (including board) program debugging, testing, electromagnetic compatibility program prepared in the test project. Avoid static-sensitive devices, use of electrostatic sensitive devices is generally not less than 2000V, otherwise they will be considered carefully, anti-static design methods; in structure, to achieve a good connection to the gas and take the necessary insulation or shielding, improve the machine's anti-static capacity. Many experts of cell phone jammer devote much spare time to improve the quality of cell phone jammer . CMOS circuit design to take anti-latch. CMOS devices idle floating pins to avoid, depending on the characteristics of the device is idle or pins to the power side to side. The function introduced at the board power supply filter circuit suitable to be used, as far as possible the same time filter out common mode noise and differential mode noise, noise relief work in particular, with the signal to be separated, consider using protected; IC The power input decoupling capacitor should be arranged in order to improve anti-jamming capability. Radiator with the board within the power or ground or shield to protect the ground connection (connect shield to priority or protected), to reduce the radiation interference. In general levels of power input, the output should use the appropriate filter circuit.Many technical engineers make great contribution to enhance the quality of cell phone jammer . rack, shielded box is designedto do? If you do the shield design, to analyze the characteristics of electromagnetic fields, determine what shielding materials, to determine the size and number of openings, to determine the manner and lap lap material. clear maximum operating frequency of each board, the operating frequency in the 160MHz (or 200 MHz) or more devices or components of the shield to take the necessary measures to reduce the radiation level and to improve anti-interference ability of radiated interference.
Tuesday, January 17, 2012
The working time of built-in antenna of cell phone jammer
GOEP can be used to transfer objects from one device to another device. Object can be arbitrary, such as pictures, documents, business cards and so on. This profile defines two roles: to pull or push an object to provide the location of the server and start the operation of the client. GOEP to use configuration files to other OBEX protocol provides a common blueprint. HFP describes how a gateway device for hands-free equipment for make and receive calls. A typical configuration such as cars use the cell phoneas a gateway device. In the car, stereo system for telecell phoneaudio, and microcell phoneinstalled inside the vehicle is used to send output audio during a call. The power line energizing cell phone jammer is used for power supply and remote control signal of transmission.
HFP can be used for personal computer at home or office environment as a speaker cell phonecase. Hardcopy Cable Replacement Profile (HCRP). HCRP defines how Bluetooth wireless link to complete driver-based printing. This profile defines two roles client and server. Clients include print driver for the device, the print program for the client wishes to print its contents on the server. Common configuration, such as acting as a client PC acting as a server by using the driver for the printer to print. This provides a more convenient choice to replace the wireless device and the printer cable. If some students manually cut off power supply of cell phone jammer and then cell phone jammer will be energized again for a while.
HCRP does not set the standard for communication to the printer, so the driver depends on a particular printer model or range may be. Headset Profile (HSP). HSP describes how a Bluetooth headset or other Bluetooth device with your computer (such as mobile phones) communication. Connected and configured, the headset can be used as a remote device's audio input and output interfaces. Human Interface Device Profile (HID). HID profile defines the Bluetooth HID (such as keyboards, pointing devices, gaming devices and remote monitoring devices) using protocols, procedures and functions. It is suggested that 20% allowance should be kept for the whole cell phone jammer project.
Bluetooth device transmits inquiry messages and listens for the response in an attempt to discover other Bluetooth devices within the coverage area of the program. Bluetooth devices to monitor its inquiry scan physical channel receives the query message to the program. Internal communication system configuration files (ICP). As due to other noise, others can not hear you say, like, Bluetooth radio may also be due to other RF interference and not receiving. Because of Bluetooth wireless technology without the need to apply for permits to use the band for transmission, so this is particularly noteworthy. Fortunately, the technology has been carefully designed, in which the band will not only unnecessary noise, but also to avoid other radio waves. The construction period of the whole cell phone jammer system lasts for 2 weeks.
Can affect Bluetooth wireless products, technology products, including some of the common radio frequency microwave and some models of cordless phones. Flow of information entities according to the time before the line and follow-up entity and its bundled situation. The information flow in the stream, the information entities according to the time before the line and follow-up entity and its bundled together. At least to store its BD_ADDR Bluetooth device. L2CAP layer in the two devices to establish a logical connection for a single application or higher layer protocol services. Establish the logical connection on L2CAP level program. The red flashing means cell phone jammer is in the off status.
HFP can be used for personal computer at home or office environment as a speaker cell phonecase. Hardcopy Cable Replacement Profile (HCRP). HCRP defines how Bluetooth wireless link to complete driver-based printing. This profile defines two roles client and server. Clients include print driver for the device, the print program for the client wishes to print its contents on the server. Common configuration, such as acting as a client PC acting as a server by using the driver for the printer to print. This provides a more convenient choice to replace the wireless device and the printer cable. If some students manually cut off power supply of cell phone jammer and then cell phone jammer will be energized again for a while.
HCRP does not set the standard for communication to the printer, so the driver depends on a particular printer model or range may be. Headset Profile (HSP). HSP describes how a Bluetooth headset or other Bluetooth device with your computer (such as mobile phones) communication. Connected and configured, the headset can be used as a remote device's audio input and output interfaces. Human Interface Device Profile (HID). HID profile defines the Bluetooth HID (such as keyboards, pointing devices, gaming devices and remote monitoring devices) using protocols, procedures and functions. It is suggested that 20% allowance should be kept for the whole cell phone jammer project.
Bluetooth device transmits inquiry messages and listens for the response in an attempt to discover other Bluetooth devices within the coverage area of the program. Bluetooth devices to monitor its inquiry scan physical channel receives the query message to the program. Internal communication system configuration files (ICP). As due to other noise, others can not hear you say, like, Bluetooth radio may also be due to other RF interference and not receiving. Because of Bluetooth wireless technology without the need to apply for permits to use the band for transmission, so this is particularly noteworthy. Fortunately, the technology has been carefully designed, in which the band will not only unnecessary noise, but also to avoid other radio waves. The construction period of the whole cell phone jammer system lasts for 2 weeks.
Can affect Bluetooth wireless products, technology products, including some of the common radio frequency microwave and some models of cordless phones. Flow of information entities according to the time before the line and follow-up entity and its bundled situation. The information flow in the stream, the information entities according to the time before the line and follow-up entity and its bundled together. At least to store its BD_ADDR Bluetooth device. L2CAP layer in the two devices to establish a logical connection for a single application or higher layer protocol services. Establish the logical connection on L2CAP level program. The red flashing means cell phone jammer is in the off status.
Monday, January 16, 2012
Nonconforming host ofcellphone jammer is found
Also known as "analog-digital converter", referred to as "ADC." Continuous change in the analog or quantify the amount of (discrete), converted to the corresponding digital circuits. Computer system capable of independent execution, completion data and instructions for processing and handling some by the data processing unit, instruction processing unit, and storage controllers. according to executive function can be divided into the central processor, peripheral processor and interface communications processors. The working frequency of cell phone jammer also includes 1805~1880MHz.
Also known as "memory device." Data is stored in the microprocessor and various program installations. Is an important part of the microprocessor, the memory cell collection, address registers, decoder driver circuit. Sense amplifier and the timing control circuit of several parts. Only need to transmit signals in the spectrum and the spectrum of a frequency filter out other selection techniques. The basic form is the use of inductors and capacitors reactance characteristic frequency, the inductance, capacitance in the circuit in the right mix to form a filter network to complete the frequency selection. Actual inductor-capacitor network and also to suppress the transmission band. The DC-DC converter input voltage is used for cell phone jammer.
In addition, application of piezoelectric crystals, piezoelectric ceramics and mechanical oscillator composed of the resonant filter, and a variety of active filter. They have a strong frequency-selective properties, applications are increasingly being used. Also known as "variable reactance diodes." Is a PN junction capacitance using (or contact with the barrier capacitance of the reverse bias voltage VR child dependency relationships and principles of the diode is made. The materials used are mostly single-crystal silicon or gallium arsenide, and the use of epitaxial technology. Anti- bias voltage is larger, the smaller the junction capacitance. varactor diodes with substrate resistivity and series resistance on the main parameters are: zero-bias junction capacitance at zero bias excellent value, the reverse breakdown voltage, the center back bias, nominal capacitance, capacitance range (in units of picofarads) and the cut-off frequency. And the output voltage of cell phone jammer is 5V.
For different purposes, should use a different C and M VR features varactor diode, where the resonant circuit tuned specifically for the electric modulation diode, the parameters for participation to put up solid varactor diode and power source for times frequency, phase of the power step varactor diodes. "Endangered rate offset" for short. Refers to the instantaneous frequency of the FM carrier wave frequency of the maximum deviation. Also known as "the first harmonic." Refers to the anharmonic periodic oscillation with this period contained in the corresponding wavelength or frequency components. Refers to the frequency of n times the fundamental frequency sine wave, together with the fundamental harmonic are non-periodic oscillation of the spectral components. Refers to the communication system to transmit information in the media or channels.cell phone jammer can effectively shield the microwave signal between the cell tower and the cell phone.
In the transmitter, in order to achieve the intended purpose of the original signal processing according to certain rules of procedure. Means opposite the receiving end and coding procedures, the pulse code modulation signal into a pulse amplitude modulated signals. The main equipment by a number of logic circuits with constant current source component. The high frequency signal into a lower frequency signals. The lower frequency signal into high frequency signals. Nonlinear circuits usually generate a series of harmonics from the fundamental, and then selected by band pass filter harmonic multiples of the required to achieve the multiplier. The efficient and strict management is necessary forcell phone jammer.
Also known as "memory device." Data is stored in the microprocessor and various program installations. Is an important part of the microprocessor, the memory cell collection, address registers, decoder driver circuit. Sense amplifier and the timing control circuit of several parts. Only need to transmit signals in the spectrum and the spectrum of a frequency filter out other selection techniques. The basic form is the use of inductors and capacitors reactance characteristic frequency, the inductance, capacitance in the circuit in the right mix to form a filter network to complete the frequency selection. Actual inductor-capacitor network and also to suppress the transmission band. The DC-DC converter input voltage is used for cell phone jammer.
In addition, application of piezoelectric crystals, piezoelectric ceramics and mechanical oscillator composed of the resonant filter, and a variety of active filter. They have a strong frequency-selective properties, applications are increasingly being used. Also known as "variable reactance diodes." Is a PN junction capacitance using (or contact with the barrier capacitance of the reverse bias voltage VR child dependency relationships and principles of the diode is made. The materials used are mostly single-crystal silicon or gallium arsenide, and the use of epitaxial technology. Anti- bias voltage is larger, the smaller the junction capacitance. varactor diodes with substrate resistivity and series resistance on the main parameters are: zero-bias junction capacitance at zero bias excellent value, the reverse breakdown voltage, the center back bias, nominal capacitance, capacitance range (in units of picofarads) and the cut-off frequency. And the output voltage of cell phone jammer is 5V.
For different purposes, should use a different C and M VR features varactor diode, where the resonant circuit tuned specifically for the electric modulation diode, the parameters for participation to put up solid varactor diode and power source for times frequency, phase of the power step varactor diodes. "Endangered rate offset" for short. Refers to the instantaneous frequency of the FM carrier wave frequency of the maximum deviation. Also known as "the first harmonic." Refers to the anharmonic periodic oscillation with this period contained in the corresponding wavelength or frequency components. Refers to the frequency of n times the fundamental frequency sine wave, together with the fundamental harmonic are non-periodic oscillation of the spectral components. Refers to the communication system to transmit information in the media or channels.cell phone jammer can effectively shield the microwave signal between the cell tower and the cell phone.
In the transmitter, in order to achieve the intended purpose of the original signal processing according to certain rules of procedure. Means opposite the receiving end and coding procedures, the pulse code modulation signal into a pulse amplitude modulated signals. The main equipment by a number of logic circuits with constant current source component. The high frequency signal into a lower frequency signals. The lower frequency signal into high frequency signals. Nonlinear circuits usually generate a series of harmonics from the fundamental, and then selected by band pass filter harmonic multiples of the required to achieve the multiplier. The efficient and strict management is necessary forcell phone jammer.
Nonconformance of components of cell phonejammer is found
Cell phone service basis. Cell phone repair basic terminology. Those containing resistance, inductance and capacitance of the circuit from the AC of the obstacles. Three-point capacitance oscillator (also called reference is hereby oscillator). A self-excited oscillator. By the series capacitor and the inductor circuit and the positive feedback amplifier. Two series capacitor for oscillation circuit of the three endpoints, respectively, with the oscillating tube three pins connecting the name. Loop filter: the role with two low-pass filter: the output of phase detector attenuation of high frequency error components, in order to improve anti-interference performance; locked out of the loop when the loop to improve short-term memory, and rapid recovery signal. cell phone jammer adopts imported automatic surface mount system.
In the voltage-controlled oscillator circuit components used in frequency control devices as oscillators, VCO is a voltage-controlled oscillator for short. Is a modulated spectrum to a narrow main lobe, sidelobe fading fast, to meet the requirements of the GSM system a channel width of 200kHZ requirements, saving the modulation frequency resources. Encoding of digital communications. The main process is the voice, image and other analog signal sampling time intervals, so that discrete, while the value of the sample stratified according to the nearest rounded to quantify, while the sample values in a set of binary code to represent the sampling pulse amplitude . GSM system using frequency division multiplexing, the entire frequency band is divided into 124 pairs of carrier frequency, the carrier frequency interval is 200KHZ, duplex spacing of 45MHz. Thecell phone jammer has stable quality and performance with repair rate not more than 2%.
Band uplink (mobile to base station) to 890MHZ-9l5MHZ, downlink frequency band (base station to mobile station) is 935MHZ-960MHZ. In the downlink band number is n (n = l ~ 124) of the carrier frequency of the frequency can be Fu (n) = 890 +0.2 nMHz (upstream) or Fd (n) = 935 +0.2 nMHz = Fu (n) +45 MHZ (downstream). In each RF channel, GSM system uses TDMA access technologies, each carrier frequency is divided by time into a TDMA frame, the frame size is 4.6ms; each TDMA frame is divided into eight time slots, slot length of 557pS. Therefore, a carrier can have 8 cell phones simultaneously (a cell phone occupies a time slot). cell phone jammer selects Hitachi integrated circuit of high performance.
GSM cell phones transmit at the receiver using the same slot number, and start receiving the TDMA frame time relative to the launch delay the start time of the TDMA frame slot three time intervals, so that the time slot to receive launch separate, that the TDMA frame staggered to avoid the GSM launch at the same time due to simultaneous reception interference, so does not use GSM cell phones expensive duplex filter, thus reducing costs. GSM mobile communication system to meet the adjacent channel interference on the stringent requirements, the use of Gaussian minimum frequency shift key modulation (GMSK), the GMSK modulation, the modulation rate of 270833kbe, each time division multiple access TDMA frame occupies one slot to send a pulse cluster, the cluster pulse rate 33.86kbo. Reflow oven machining will be performed for cell phone jammer.
Modulation is the audio signal "attached" to the high-frequency oscillation, and with the audio signal to control the high-frequency oscillation parameters. Remove from the modulated wave audio modulation signal is called demodulation. One kind can convert direct current with a certain frequency AC signal output circuit combination. Refers to the total integration parameter or distributed parameter circuit reactance components of the composition. Is a realization of phase-lock automatic control system. It is generally the phase detector, loop filter, voltage controlled oscillators and other components. Also known as "digital to analog converter", referred to as "DAC." Will be converted to its corresponding digital analog circuit. 825~960MHz is one of working frequency of cell phone jammer.
In the voltage-controlled oscillator circuit components used in frequency control devices as oscillators, VCO is a voltage-controlled oscillator for short. Is a modulated spectrum to a narrow main lobe, sidelobe fading fast, to meet the requirements of the GSM system a channel width of 200kHZ requirements, saving the modulation frequency resources. Encoding of digital communications. The main process is the voice, image and other analog signal sampling time intervals, so that discrete, while the value of the sample stratified according to the nearest rounded to quantify, while the sample values in a set of binary code to represent the sampling pulse amplitude . GSM system using frequency division multiplexing, the entire frequency band is divided into 124 pairs of carrier frequency, the carrier frequency interval is 200KHZ, duplex spacing of 45MHz. Thecell phone jammer has stable quality and performance with repair rate not more than 2%.
Band uplink (mobile to base station) to 890MHZ-9l5MHZ, downlink frequency band (base station to mobile station) is 935MHZ-960MHZ. In the downlink band number is n (n = l ~ 124) of the carrier frequency of the frequency can be Fu (n) = 890 +0.2 nMHz (upstream) or Fd (n) = 935 +0.2 nMHz = Fu (n) +45 MHZ (downstream). In each RF channel, GSM system uses TDMA access technologies, each carrier frequency is divided by time into a TDMA frame, the frame size is 4.6ms; each TDMA frame is divided into eight time slots, slot length of 557pS. Therefore, a carrier can have 8 cell phones simultaneously (a cell phone occupies a time slot). cell phone jammer selects Hitachi integrated circuit of high performance.
GSM cell phones transmit at the receiver using the same slot number, and start receiving the TDMA frame time relative to the launch delay the start time of the TDMA frame slot three time intervals, so that the time slot to receive launch separate, that the TDMA frame staggered to avoid the GSM launch at the same time due to simultaneous reception interference, so does not use GSM cell phones expensive duplex filter, thus reducing costs. GSM mobile communication system to meet the adjacent channel interference on the stringent requirements, the use of Gaussian minimum frequency shift key modulation (GMSK), the GMSK modulation, the modulation rate of 270833kbe, each time division multiple access TDMA frame occupies one slot to send a pulse cluster, the cluster pulse rate 33.86kbo. Reflow oven machining will be performed for cell phone jammer.
Modulation is the audio signal "attached" to the high-frequency oscillation, and with the audio signal to control the high-frequency oscillation parameters. Remove from the modulated wave audio modulation signal is called demodulation. One kind can convert direct current with a certain frequency AC signal output circuit combination. Refers to the total integration parameter or distributed parameter circuit reactance components of the composition. Is a realization of phase-lock automatic control system. It is generally the phase detector, loop filter, voltage controlled oscillators and other components. Also known as "digital to analog converter", referred to as "DAC." Will be converted to its corresponding digital analog circuit. 825~960MHz is one of working frequency of cell phone jammer.
Sunday, January 15, 2012
The worker check the defect of cell phone jammer
In the 3G business, mobile music, mobile TV, video telephony, mobile email, mobile search, instant messaging and other invariably become the basis of the three major telecom companies in the future focus. In the mobile terminal, for China's domestic 3G terminal consumers still not a lot, especially for the development of TD-SCDMA, CDMA2000, China Mobile and China Telecom for the development; and the three companies will increase in the future, especially 3G cell phones the depth of the high-end 3G cell phone customization efforts. The school will need more intelligentcell phone jammersystem in large quantity.
A good grasp of basic telecom operators in the 3G business and terminal needs to start full cooperation, China-made cell phones will be pulled up to the importance of high-end path. In addition, our many value-added telecom businesses are seeing 3G mobile Internet era of the brilliant prospects, and began to have the water tested, and already have some characteristics of the company stand out, and achieved market success, such as the number of mobile games do stone company , to master the mobile version of Tencent QQ, mobile film production in Bo media companies and so on. We firmly believe that, after many more features and applications based on the success of mobile value-added telecommunications business there. The weatherproofcell phone jammeris of better performance.
The development of value-added telecommunications business trend of more and more obvious to the iCell phone's mobile terminal manufacturers to provide a business cooperation and business opportunities implants. Nokia and air networks as strategic cooperation is a sign of future needs and some of the mainstream of the terminal platform large value-added telecommunications companies to cooperate in order to enhance their position in the industry chain and negotiating capacity, enhance and maintain its own brand of high-end positioning. This approach can also China's domestic cell phone manufacturers use. Electronic paper technology since its birth, after research and development, the sample with a small amount of production, the official production stage, and finally in 2008 to a large panel suppliers in the layout of the amount of e-book industry production. The antenna solution ofcell phone jammershould be chosen according to the situation.
As the manufacturers of electronic paper technology and features are different, each with its development and market positioning of the spindle, such as color, large size, soft touch and can be written and so on, so bring suppliers into, including smart cards, electronic tags, the clock , the cell phone keypad display decoration, advertising billboards, and even e-books and other diverse applications. In fact, back in 2000, vendors started the commercialization of electronic paper displays the occasion, was when the TFT-LCD panel industry, rapid start, although the electronic paper has a degree as paper-thin, ultra-low power consumption, wide viewing angle, no backlight module features, but other display technologies such as TFT-LCD and AMOLED compared, no influx of vendors and suppliers into the layout is not positive, resulting in PVI over the years as the world's only electronic paper display module is the only supplier business. Thecell phone jammercompany should try the best to prevent the destroy of cell phone jammer in the shipping process from happening.
However, this situation after the advent of the Kindle, a substantial market for electronic paper applications, leading TFT-LCD panel makers AU Optronics recently shot cut into the electronic paper technology, but also to provoke global supplier of electronic paper applications, unlimited imagination. Bode Wei researcher Topology Research Institute, said the four major global supplier of electronic paper technology, E Ink, SiPix, Bridgestone, Fujitsu, the existing E Ink, SiPix is mastered by Taiwan panel makers, and other vendors to strategic cooperation in the local factories and R & D center for the development model, the future of electronic paper industry in Taiwan will have a pivotal position. The store should renew some featured products of cell phone jammer.
A good grasp of basic telecom operators in the 3G business and terminal needs to start full cooperation, China-made cell phones will be pulled up to the importance of high-end path. In addition, our many value-added telecom businesses are seeing 3G mobile Internet era of the brilliant prospects, and began to have the water tested, and already have some characteristics of the company stand out, and achieved market success, such as the number of mobile games do stone company , to master the mobile version of Tencent QQ, mobile film production in Bo media companies and so on. We firmly believe that, after many more features and applications based on the success of mobile value-added telecommunications business there. The weatherproofcell phone jammeris of better performance.
The development of value-added telecommunications business trend of more and more obvious to the iCell phone's mobile terminal manufacturers to provide a business cooperation and business opportunities implants. Nokia and air networks as strategic cooperation is a sign of future needs and some of the mainstream of the terminal platform large value-added telecommunications companies to cooperate in order to enhance their position in the industry chain and negotiating capacity, enhance and maintain its own brand of high-end positioning. This approach can also China's domestic cell phone manufacturers use. Electronic paper technology since its birth, after research and development, the sample with a small amount of production, the official production stage, and finally in 2008 to a large panel suppliers in the layout of the amount of e-book industry production. The antenna solution ofcell phone jammershould be chosen according to the situation.
As the manufacturers of electronic paper technology and features are different, each with its development and market positioning of the spindle, such as color, large size, soft touch and can be written and so on, so bring suppliers into, including smart cards, electronic tags, the clock , the cell phone keypad display decoration, advertising billboards, and even e-books and other diverse applications. In fact, back in 2000, vendors started the commercialization of electronic paper displays the occasion, was when the TFT-LCD panel industry, rapid start, although the electronic paper has a degree as paper-thin, ultra-low power consumption, wide viewing angle, no backlight module features, but other display technologies such as TFT-LCD and AMOLED compared, no influx of vendors and suppliers into the layout is not positive, resulting in PVI over the years as the world's only electronic paper display module is the only supplier business. Thecell phone jammercompany should try the best to prevent the destroy of cell phone jammer in the shipping process from happening.
However, this situation after the advent of the Kindle, a substantial market for electronic paper applications, leading TFT-LCD panel makers AU Optronics recently shot cut into the electronic paper technology, but also to provoke global supplier of electronic paper applications, unlimited imagination. Bode Wei researcher Topology Research Institute, said the four major global supplier of electronic paper technology, E Ink, SiPix, Bridgestone, Fujitsu, the existing E Ink, SiPix is mastered by Taiwan panel makers, and other vendors to strategic cooperation in the local factories and R & D center for the development model, the future of electronic paper industry in Taiwan will have a pivotal position. The store should renew some featured products of cell phone jammer.
The over-temperature protection of cell phone jammer
Subsequently, Pakistan has also introduced a similar policy. In addition, including cottage machine manufacturers, including the entire Chinese army has been bogged down in foreign low-end cell phone market, fierce competition, the Red Sea, pure price competition has been the profits of China's cell phone manufacturers to quickly diluted, and the final sales are not significantly changed. Entered the high-end market to enhance the "potential" to explore the root causes of this situation, where? Is that China's domestic cell phone industry did not grasp the nature of the cell phone industry is the essence of 'potential', that is, high-end market access and control. Different countries have different stipulations for the import duty ofcell phone jammer.
Cell phone companies to enter the high, medium and low-end three markets, will have huge profits, the most critical high-end market entry, need to continue to climb, the brand pulled, in order to accumulate enough potential energy. Physics mentioned, the potential energy reserves to the higher kinetic energy can be transformed into larger, and for the cell phone industry, the potential reserves of more high-end, low-end market in the future release of the greater kinetic energy into low-end market, lower cost and more likely to succeed. Foreign cell phone giants such as Nokia, Motorola, Samsung, Sony Ericsson and no not by a firm grasp of the nature of the industry, it achieved great market success. The good after service ofcell phone jammerprovided by thecell phone jammercompany deeply impress the customer.
They not only an excellent reputation in the high-end market has laid a solid grasp with both hands and the pursuit of achieving the market have a better market for the pursuit of China's cell phone manufacturers, recognize the nature of the industry, to keep the high-end development is imperative. This not only helps to get rid of now its "external" market difficulties and the company's long-term development, more conducive to China's 3G industry, especially the current one TD industry. And specifically, to high-end development can proceed from two angles. The first point is to learn from the success of the practice of cell phone manufacturers, domestic cell phone up to the end is not unattainable thing, it is a path to follow. The user’s guide of cell phone jammer should be revised further.
Foreign practice and enhance the cell phone's basic tools, including: continuous improvement and innovative cell phone functions; focus on design to subvert the old image into the fashion element; targeting high-end customer base and try to figure out the psychological needs of high-end customers; looking for celebrity endorsements and by events for effective marketing. 16 Sony Ericsson cell phone information HANDSET INFO Walkman music cell phone launched, making it the first truly integrated music player and cell phone companies, opening the market first, pushed up the Sony Ericsson brand; Motorola emphasis on design and integration of cell phone fashion elements, the introduction of RAZA blade slim cell phone, change the image of its clumsy old-fashioned cell phones, Motorola cell phones to be in one fell swoop the front and reverse the trend of the market decline. The wall mounted bracket ofcell phone jammershould be solid enough.
Samsung Introduces hung by the neck cell phones, dual-screen clamshell cell phone, the theme of female cell phone, the world's first portable TV cell phones and gradually pulled the market of its high-end market potential build-up. Successful practice of foreign cell phone companies as the road can learn from our domestic cell phone manufacturers. The second point of view, by China's 3G services and mobile Internet, large-scale development of the machine, and basic telecom operators, value-added telecommunications business cooperation, into the high-end, greatly enhance the brand image. China Mobile, China Telecom and China Unicom, the three basic telecom business of the future 3G services and mobile terminals with great expectations. The wall mounted bracket of cell phone jammer can be decorated well in good appearance.
Cell phone companies to enter the high, medium and low-end three markets, will have huge profits, the most critical high-end market entry, need to continue to climb, the brand pulled, in order to accumulate enough potential energy. Physics mentioned, the potential energy reserves to the higher kinetic energy can be transformed into larger, and for the cell phone industry, the potential reserves of more high-end, low-end market in the future release of the greater kinetic energy into low-end market, lower cost and more likely to succeed. Foreign cell phone giants such as Nokia, Motorola, Samsung, Sony Ericsson and no not by a firm grasp of the nature of the industry, it achieved great market success. The good after service ofcell phone jammerprovided by thecell phone jammercompany deeply impress the customer.
They not only an excellent reputation in the high-end market has laid a solid grasp with both hands and the pursuit of achieving the market have a better market for the pursuit of China's cell phone manufacturers, recognize the nature of the industry, to keep the high-end development is imperative. This not only helps to get rid of now its "external" market difficulties and the company's long-term development, more conducive to China's 3G industry, especially the current one TD industry. And specifically, to high-end development can proceed from two angles. The first point is to learn from the success of the practice of cell phone manufacturers, domestic cell phone up to the end is not unattainable thing, it is a path to follow. The user’s guide of cell phone jammer should be revised further.
Foreign practice and enhance the cell phone's basic tools, including: continuous improvement and innovative cell phone functions; focus on design to subvert the old image into the fashion element; targeting high-end customer base and try to figure out the psychological needs of high-end customers; looking for celebrity endorsements and by events for effective marketing. 16 Sony Ericsson cell phone information HANDSET INFO Walkman music cell phone launched, making it the first truly integrated music player and cell phone companies, opening the market first, pushed up the Sony Ericsson brand; Motorola emphasis on design and integration of cell phone fashion elements, the introduction of RAZA blade slim cell phone, change the image of its clumsy old-fashioned cell phones, Motorola cell phones to be in one fell swoop the front and reverse the trend of the market decline. The wall mounted bracket ofcell phone jammershould be solid enough.
Samsung Introduces hung by the neck cell phones, dual-screen clamshell cell phone, the theme of female cell phone, the world's first portable TV cell phones and gradually pulled the market of its high-end market potential build-up. Successful practice of foreign cell phone companies as the road can learn from our domestic cell phone manufacturers. The second point of view, by China's 3G services and mobile Internet, large-scale development of the machine, and basic telecom operators, value-added telecommunications business cooperation, into the high-end, greatly enhance the brand image. China Mobile, China Telecom and China Unicom, the three basic telecom business of the future 3G services and mobile terminals with great expectations. The wall mounted bracket of cell phone jammer can be decorated well in good appearance.
Saturday, January 14, 2012
Testing of Main Indices of Signal Repeater
Testing of Main Indices of Signal Repeater
Testing concerning about the main indices of mobile communication signal repeater should consider the accuracy of testing and also the cost of testing and as well as possibility of easy and convenient operation of testing.
1. Testing of rated output power, maximum gain, gain adjustment range and AGC range of signal repeater
When testing the rated output power, the attenuation from output port of cell phone jammer to the input port of watt meter should be considered.
Many other indices should be tested at the power specified by the manufacturer of signal repeater, therefore, when the manufacturer determines the maximum output power, influence on other indices (such as the intermodulation, stray emission and so on) should be considered.
2. Testing of bandwidth, fluctuation in band and suppression beyond band of signal repeater
The sweeping frequency testing should be adopted as much as possible. The network analyzer (vector net and standard net) should be used or the frequency spectrum analyzer with tracking generator can be utilized. The latter one is recommended for its dynamic range is big and it can reduce the types of instruments to be tested so that the cost can be cut.
After connecting with the tracking generator, the center frequency should be adjusted to the center frequency of the signal repeater to be tested. The width of sweeping frequency should be adjusted to three times or seven times of band width of signal repeater to be tested (it is independent on the band width to be tested and magnification will be higher if the band width is narrow).
The output level should be adjusted to the input level of the signal repeater to be tested which is Lin. The reference level of the frequency spectrum analyzer should be adjusted to the almost full scale. The response curve of the filter will appear on the screen of frequency spectrum analyzer. The band width, fluctuation in band and suppression beyond band can be read with labels.
When testing the fluctuation in band, it is suggested that the input level Lin should be reduced to completely expose the fluctuation in band. When testing the suppression beyond band, if the dynamic range of the testing instrument is not big enough, the spot frequency testing method can be adopted.
The signal repeater should have the function of remote monitoring and controlling. The cell phone jammer is installed in the remote area. Some manufacturers will allocate a cell phone for the signal repeater. The cell phone number can be used to form the network management system of the signal repeater itself. But the price will be a little bit high.
When the signal repeater is not large in quantity, it is unnecessary to purchase the network management system. The easiest and most effective method is using the cable to lead the remote function to the ground through the RS232 port. And then, it is unnecessary to clime up the iron tower every time checking and inspection are performed to the signal repeater.
The signal repeater should have the function of fault and alarm recording. The signal repeater should have record of power off, overload of power amplification and whether there appears the self excitation or not.
Testing concerning about the main indices of mobile communication signal repeater should consider the accuracy of testing and also the cost of testing and as well as possibility of easy and convenient operation of testing.
1. Testing of rated output power, maximum gain, gain adjustment range and AGC range of signal repeater
When testing the rated output power, the attenuation from output port of cell phone jammer to the input port of watt meter should be considered.
Many other indices should be tested at the power specified by the manufacturer of signal repeater, therefore, when the manufacturer determines the maximum output power, influence on other indices (such as the intermodulation, stray emission and so on) should be considered.
2. Testing of bandwidth, fluctuation in band and suppression beyond band of signal repeater
The sweeping frequency testing should be adopted as much as possible. The network analyzer (vector net and standard net) should be used or the frequency spectrum analyzer with tracking generator can be utilized. The latter one is recommended for its dynamic range is big and it can reduce the types of instruments to be tested so that the cost can be cut.
After connecting with the tracking generator, the center frequency should be adjusted to the center frequency of the signal repeater to be tested. The width of sweeping frequency should be adjusted to three times or seven times of band width of signal repeater to be tested (it is independent on the band width to be tested and magnification will be higher if the band width is narrow).
The output level should be adjusted to the input level of the signal repeater to be tested which is Lin. The reference level of the frequency spectrum analyzer should be adjusted to the almost full scale. The response curve of the filter will appear on the screen of frequency spectrum analyzer. The band width, fluctuation in band and suppression beyond band can be read with labels.
When testing the fluctuation in band, it is suggested that the input level Lin should be reduced to completely expose the fluctuation in band. When testing the suppression beyond band, if the dynamic range of the testing instrument is not big enough, the spot frequency testing method can be adopted.
The signal repeater should have the function of remote monitoring and controlling. The cell phone jammer is installed in the remote area. Some manufacturers will allocate a cell phone for the signal repeater. The cell phone number can be used to form the network management system of the signal repeater itself. But the price will be a little bit high.
When the signal repeater is not large in quantity, it is unnecessary to purchase the network management system. The easiest and most effective method is using the cable to lead the remote function to the ground through the RS232 port. And then, it is unnecessary to clime up the iron tower every time checking and inspection are performed to the signal repeater.
The signal repeater should have the function of fault and alarm recording. The signal repeater should have record of power off, overload of power amplification and whether there appears the self excitation or not.
Wireless Communice cell phone jammer Detectors
Wireless Communication Equipment Detector
First of all, thank you for choosing the examination room safeguard series product of signal detectors. “Examination room safeguard”- examination room cheating equipment detector is the new-type and high-tech examination room electronic and technical protection device specially researched, developed and manufactured for the phenomenon of using wireless invisible headset and wireless handheld communication equipment to cheat in the examination.
The signal detectors adopts electromagnetic induction and detecting technology, which can detect the electromagnetic wave emitted by the invisible headset emitter and the electromagnetic signal of every frequency channel sent by the communication equipment and accurately locate. It can stop the illegal use of various mobile communication equipments in the examination room.
2. Main characteristics of cell phone jammerVarious wireless invisible headsets can be accurately detected by signal detectors
Various types of wireless communication equipments (cell phone, intercom, high-power vehicle radio station, wireless pinhole camera, wireless video communication equipment, Bluetooth wireless communication equipment, various self-made communication equipments and radio and so on) can be detected and located by signal detectors.
Inductive passive detecting technology with no electromagnetic radiation for signal detectors.
Surface-mounted IC circuit design with low energy consumption and extra-long standby period.
Intelligent signal analysis disposition software is inlaid in the single-chip machine with timely and accurate precaution alarming for signal detectors.
Firmware supports to upgrade the software to suit to future needs of detecting for signal detectors.
Gaining of extra-strong signal is enlarged and the weak signal can be got sensitively.
The specifically short-distance disposing circuit with accurate and exact intensive crowd location.
High-quality monitoring signal input to support to obtain the evidence by recording.
Eight signal level strength indications with vibration and mute precaution alarming supported.
Humanized thin-film and micro-touch panel design is easy to operate and clear to indicate with strong directional sense.
3. Product specification of signal detectors
Detecting range >= 100 m2
Pre-alarming range >= 12.5 m2
Direction identification ＜ ± 15 degree
Sensitivity of signal detectors: 6dB
Pre-alarming notice of signal detectors: Level 10 LED + displaying + vibration alarming
Power supply of signal detectors: two pieces of AA batteries (No.7 battery)
Working current of signal detectors: ＜ 50mA
4 Method of use of signal detectors
1. Open the package of cell phone jammer, take out the machine, open cove of battery case at the back of machine, install batteries as per the correct directions, put the battery case cover back, insert the headset into the jack of headset and put the headset on.
2. Switch on the power supply of signal detectors and then the power supply light will be on. The equipment will be in the working status after self-inspection and then pre-alarm.
3. Hold the signal detectors in the hand, make an inspection tour in the examination room, observe signal change of display screen, adjust equipment direction and determine where the cheating equipment locates according to the displaying signal strength and voice strength being monitored.
4. If the signal voice in the headset is increasing during moving and signal strength indication value on the displaying screen is full, it means the cheater in within the range of 1m.
5. Press the gain button of signal detectors to perform the accurate location.
When someone uses such electronic communication equipments as the cell phone, intercom and so on, the detector will also pre-alarm with the same operational principle.
First of all, thank you for choosing the examination room safeguard series product of signal detectors. “Examination room safeguard”- examination room cheating equipment detector is the new-type and high-tech examination room electronic and technical protection device specially researched, developed and manufactured for the phenomenon of using wireless invisible headset and wireless handheld communication equipment to cheat in the examination.
The signal detectors adopts electromagnetic induction and detecting technology, which can detect the electromagnetic wave emitted by the invisible headset emitter and the electromagnetic signal of every frequency channel sent by the communication equipment and accurately locate. It can stop the illegal use of various mobile communication equipments in the examination room.
2. Main characteristics of cell phone jammerVarious wireless invisible headsets can be accurately detected by signal detectors
Various types of wireless communication equipments (cell phone, intercom, high-power vehicle radio station, wireless pinhole camera, wireless video communication equipment, Bluetooth wireless communication equipment, various self-made communication equipments and radio and so on) can be detected and located by signal detectors.
Inductive passive detecting technology with no electromagnetic radiation for signal detectors.
Surface-mounted IC circuit design with low energy consumption and extra-long standby period.
Intelligent signal analysis disposition software is inlaid in the single-chip machine with timely and accurate precaution alarming for signal detectors.
Firmware supports to upgrade the software to suit to future needs of detecting for signal detectors.
Gaining of extra-strong signal is enlarged and the weak signal can be got sensitively.
The specifically short-distance disposing circuit with accurate and exact intensive crowd location.
High-quality monitoring signal input to support to obtain the evidence by recording.
Eight signal level strength indications with vibration and mute precaution alarming supported.
Humanized thin-film and micro-touch panel design is easy to operate and clear to indicate with strong directional sense.
3. Product specification of signal detectors
Detecting range >= 100 m2
Pre-alarming range >= 12.5 m2
Direction identification ＜ ± 15 degree
Sensitivity of signal detectors: 6dB
Pre-alarming notice of signal detectors: Level 10 LED + displaying + vibration alarming
Power supply of signal detectors: two pieces of AA batteries (No.7 battery)
Working current of signal detectors: ＜ 50mA
4 Method of use of signal detectors
1. Open the package of cell phone jammer, take out the machine, open cove of battery case at the back of machine, install batteries as per the correct directions, put the battery case cover back, insert the headset into the jack of headset and put the headset on.
2. Switch on the power supply of signal detectors and then the power supply light will be on. The equipment will be in the working status after self-inspection and then pre-alarm.
3. Hold the signal detectors in the hand, make an inspection tour in the examination room, observe signal change of display screen, adjust equipment direction and determine where the cheating equipment locates according to the displaying signal strength and voice strength being monitored.
4. If the signal voice in the headset is increasing during moving and signal strength indication value on the displaying screen is full, it means the cheater in within the range of 1m.
5. Press the gain button of signal detectors to perform the accurate location.
When someone uses such electronic communication equipments as the cell phone, intercom and so on, the detector will also pre-alarm with the same operational principle.
Friday, January 13, 2012
The workshop has requirement for cell phonejammer
Currently, the global and Chinese mobile cell phoneindustry has developed rapidly, the integration of upstream and downstream integration and product innovation is still the main theme of the mobile cell phoneindustry. In order to better serve the mobile cell phoneindustry, organized the 2008 International Mobile Industry Exhibition (IMIE), the General Assembly to enhance the value of the estate, IMIE Organizing Committee for the domestic mobile cell phonebrands, design and ODM, OEM, EMS manufacturers purchase more than 30 and R & D managers in the industry supply and demand aspects of the research work. It requires that the omnidirectional antenna of cell phone jammer can have the biggest signal covering radius.
The line of machine brands have different characteristics based on industry concerns the law, we define three lines on the Chinese market brands, from Nokia, Motorola, Samsung, Sony Ericsson, LG, HTC, Lenovo, Bird, Amoi and other transnational and domestic machine manufacturers composed of mobile cell phonemanufacturers brands, market share in China's top ten; share in ten outside, but the monthly production of over 200,000 businesses for the second-tier brands; monthly output 200,000 or less, but have mobile cell phonelicenses to three-machine manufacturers brands. In the study, understand that some companies are still first-line brands is vigorously promoting localization, reduce supply chain costs. The area around the antenna of cell phone jammer is the area where the shielding signal can be can be transmitted farthest.
But the whole, the current first-line brands of mobile phones and other parts of the key components of innovative technologies and products more attention to their better product improvement and innovation; the second and third tier brands to promote products now, although it also innovation and development, but overall, these are basically in the product innovation-based industries to follow, but it is more important, more suppliers gather resources, optimize the supply chain, reduce product cost In addition, to adapt its strategy to follow, hot on the key components of some industries and other parts of the innovative technologies and products also have a strong interest and demand. The key components of innovative new products and components innovative technologies and products of concern has been sustained and healthy development is the lifeblood of business, in a highly competitive mobile cell phoneindustry, especially, especially for some of the industry leader is more important, the product innovation requires the co upstream and downstream enterprises and efforts. The directional antenna of cell phone jammer can make the shielding signal intensively emit to a certain area.
Through research to understand the current machine manufacturers for the procurement of critical components and parts demand in the overseas area and product features on the show distinctive features. From a regional point of view, the status of Japanese technology power is still strong, the Japanese electronic components technology, display, camera module, and storage technologies and mobile value-added services industry has been sought after; Korea's multimedia chip technology, industrial design and structural parts of Taiwan technique has attracted industry recognition and great interest; Europe and North America's operating system and software technology most competitive, while a number of chip technology has also been recognized. Link from the product point of view, display modules, camera modules, PCB industry has always been a hot demand, and mobile TV end of the module, GPS, light technology, materials, environmental technology, photographic technology, NFC technology, touch screen technology, memory card has a strong market demand potential. The signal emission performance and distribution of directional antenna of cell phone jammer will be described as follows.
Taiwan-funded enterprises and procurement become the darling of South China's mobile cell phoneindustry, with healthy and rapid development of new licenses have been more and more machine manufacturers, while the original license manufacturers continue to expand production capacity, the rapid development of mobile cell phoneproduction in China, while some of the cross-machine manufacturers are still working to increase local sourcing in order to better integrate the supply chain. The Taiwan-funded enterprises and enterprises in South China will no doubt be the biggest beneficiary, learned in the research process, with reliable quality and price advantage, many Taiwan-funded enterprises have become the machine of choice for vendors for parts procurement; and southern China with strong industry cluster effect, a machine parts manufacturer for the procurement of key areas of localization. Multiple cell cell phonesite testing is the rapidest, the most convenient and feasible testing method for cell phone jammer
The line of machine brands have different characteristics based on industry concerns the law, we define three lines on the Chinese market brands, from Nokia, Motorola, Samsung, Sony Ericsson, LG, HTC, Lenovo, Bird, Amoi and other transnational and domestic machine manufacturers composed of mobile cell phonemanufacturers brands, market share in China's top ten; share in ten outside, but the monthly production of over 200,000 businesses for the second-tier brands; monthly output 200,000 or less, but have mobile cell phonelicenses to three-machine manufacturers brands. In the study, understand that some companies are still first-line brands is vigorously promoting localization, reduce supply chain costs. The area around the antenna of cell phone jammer is the area where the shielding signal can be can be transmitted farthest.
But the whole, the current first-line brands of mobile phones and other parts of the key components of innovative technologies and products more attention to their better product improvement and innovation; the second and third tier brands to promote products now, although it also innovation and development, but overall, these are basically in the product innovation-based industries to follow, but it is more important, more suppliers gather resources, optimize the supply chain, reduce product cost In addition, to adapt its strategy to follow, hot on the key components of some industries and other parts of the innovative technologies and products also have a strong interest and demand. The key components of innovative new products and components innovative technologies and products of concern has been sustained and healthy development is the lifeblood of business, in a highly competitive mobile cell phoneindustry, especially, especially for some of the industry leader is more important, the product innovation requires the co upstream and downstream enterprises and efforts. The directional antenna of cell phone jammer can make the shielding signal intensively emit to a certain area.
Through research to understand the current machine manufacturers for the procurement of critical components and parts demand in the overseas area and product features on the show distinctive features. From a regional point of view, the status of Japanese technology power is still strong, the Japanese electronic components technology, display, camera module, and storage technologies and mobile value-added services industry has been sought after; Korea's multimedia chip technology, industrial design and structural parts of Taiwan technique has attracted industry recognition and great interest; Europe and North America's operating system and software technology most competitive, while a number of chip technology has also been recognized. Link from the product point of view, display modules, camera modules, PCB industry has always been a hot demand, and mobile TV end of the module, GPS, light technology, materials, environmental technology, photographic technology, NFC technology, touch screen technology, memory card has a strong market demand potential. The signal emission performance and distribution of directional antenna of cell phone jammer will be described as follows.
Taiwan-funded enterprises and procurement become the darling of South China's mobile cell phoneindustry, with healthy and rapid development of new licenses have been more and more machine manufacturers, while the original license manufacturers continue to expand production capacity, the rapid development of mobile cell phoneproduction in China, while some of the cross-machine manufacturers are still working to increase local sourcing in order to better integrate the supply chain. The Taiwan-funded enterprises and enterprises in South China will no doubt be the biggest beneficiary, learned in the research process, with reliable quality and price advantage, many Taiwan-funded enterprises have become the machine of choice for vendors for parts procurement; and southern China with strong industry cluster effect, a machine parts manufacturer for the procurement of key areas of localization. Multiple cell cell phonesite testing is the rapidest, the most convenient and feasible testing method for cell phone jammer
The lifetime of cell phone jammer
The cell phoneis a 3G era televisions, cameras, camcorders, PDA, web browser, GPS terminals in a multimedia entertainment can provide wireless Internet access, video on demand, multimedia, video conferencing, e-purse and other services. Therefore, the mobile cell phonedisplay a higher technical requirements, have a higher response speed, higher resolution, higher color saturation and higher resolution and so on. With the advances in display technology, display technology used in mobile phones on the development of very fast, from the beginning to black and white screen MSTN-LCD color CSTN-LCD, and then later reported the depth of the mobile terminal industry, TFT-LCD and OLED display. The other copy of quality report ofcell phone jammershould be sent to the quality assurance department.
Present mainly in TFT-LCD based. With the extensive development of mobile multimedia, high-performance mobile cell phonedisplay production companies will continue to benefit. Fourth, recommend investment strategies and focus on the stock the 3G era, mobile operators, Central Purchasing terminal characteristics, and only has a good R & D innovation and continue to meet the needs of telecom operators the ability to fierce competition in the future to survive, ZTE, Hisense Electric and other manufacturers clearly have a distinct advantage. With 3G services continued to carry out the domestic mobile users continues to increase, in the field of mobile cell phoneparts, related industries will directly benefit. HDI board has now become the most important structural parts of cell cell phoneapplications, domestic HDI PCB and electronics manufacturers will directly benefit from ultrasound. The foreign expert ofcell phone jammerarrived yesterday night.
3G era, the camera has become a standard feature phones, camera phones camera as an important optical components, the global market demand for the IR-cut filter, optical crystal and other companies will directly benefit; with the domestic mobile cell phoneusers has maintained rapid growth momentum, domestic SIM card manufacturers such as Eastcom Peace and Hublot shares will continue to benefit in the coming years. Depth report on the mobile terminal industry investment rating Description: Buy: Expect the next six months, the company's stock price rises above 20%; holdings: expected within the next six months, the company's stock price rises of 5% -20% ; neutral: expected within the next six months, the company's stock price movements in the range of -10% -10%; reduction: expected within the next six months the company's shares fell more than 10%. How to choose directional antenna of cell phone jammer?
Home icon in the four categories of investment advice based views suggest that the black arrow indicates the direction of the type of recommendations from the last adjustment of the type of recommendations based times, the arrow is not labeled to maintain the original investment proposal. Industry investment rating Description: Overweight: Expected within the next six months rose by more than the broader market in the industry more than 10%; neutral: expected within the next six months, the industry relative to market fluctuation -10% -10%; by hold: the expected within the next six months fell by more than the broader market in the industry more than 10%. Special Statement and Disclaimer: This report belongs to "Founder Securities," all, without the prior written authorization, no person shall conduct any form of this report the release copy. Such as references, published, required to indicate the source as "Founder Securities", and shall not be contrary to the intent of the report of deletions and modifications. Here is the introduction to omnidirectional antenna and directional antenna of cell phone jammer.
This report is based on the company and the researchers believe that the credibility of public information or field research data, but our researchers and their accuracy and completeness of the information makes no warranties, and the information in this report, opinions, forecasts reflect the time of the report to determine the initial public release may be adjusted. Report information or opinions expressed do not constitute investment, legal, accounting or operation of the proposed final tax, the company not to the contents of the report and make recommendations for final action of any kind. Circumstances permitted by law, the company's affiliates may hold the report issued by companies involved in trading securities and, and these companies are likely to provide or for a variety of financial services. Our affiliates, or individuals may be published in this report prior to use or understand the information. The directional antenna information of cell phone jammer should be described in details.
Present mainly in TFT-LCD based. With the extensive development of mobile multimedia, high-performance mobile cell phonedisplay production companies will continue to benefit. Fourth, recommend investment strategies and focus on the stock the 3G era, mobile operators, Central Purchasing terminal characteristics, and only has a good R & D innovation and continue to meet the needs of telecom operators the ability to fierce competition in the future to survive, ZTE, Hisense Electric and other manufacturers clearly have a distinct advantage. With 3G services continued to carry out the domestic mobile users continues to increase, in the field of mobile cell phoneparts, related industries will directly benefit. HDI board has now become the most important structural parts of cell cell phoneapplications, domestic HDI PCB and electronics manufacturers will directly benefit from ultrasound. The foreign expert ofcell phone jammerarrived yesterday night.
3G era, the camera has become a standard feature phones, camera phones camera as an important optical components, the global market demand for the IR-cut filter, optical crystal and other companies will directly benefit; with the domestic mobile cell phoneusers has maintained rapid growth momentum, domestic SIM card manufacturers such as Eastcom Peace and Hublot shares will continue to benefit in the coming years. Depth report on the mobile terminal industry investment rating Description: Buy: Expect the next six months, the company's stock price rises above 20%; holdings: expected within the next six months, the company's stock price rises of 5% -20% ; neutral: expected within the next six months, the company's stock price movements in the range of -10% -10%; reduction: expected within the next six months the company's shares fell more than 10%. How to choose directional antenna of cell phone jammer?
Home icon in the four categories of investment advice based views suggest that the black arrow indicates the direction of the type of recommendations from the last adjustment of the type of recommendations based times, the arrow is not labeled to maintain the original investment proposal. Industry investment rating Description: Overweight: Expected within the next six months rose by more than the broader market in the industry more than 10%; neutral: expected within the next six months, the industry relative to market fluctuation -10% -10%; by hold: the expected within the next six months fell by more than the broader market in the industry more than 10%. Special Statement and Disclaimer: This report belongs to "Founder Securities," all, without the prior written authorization, no person shall conduct any form of this report the release copy. Such as references, published, required to indicate the source as "Founder Securities", and shall not be contrary to the intent of the report of deletions and modifications. Here is the introduction to omnidirectional antenna and directional antenna of cell phone jammer.
This report is based on the company and the researchers believe that the credibility of public information or field research data, but our researchers and their accuracy and completeness of the information makes no warranties, and the information in this report, opinions, forecasts reflect the time of the report to determine the initial public release may be adjusted. Report information or opinions expressed do not constitute investment, legal, accounting or operation of the proposed final tax, the company not to the contents of the report and make recommendations for final action of any kind. Circumstances permitted by law, the company's affiliates may hold the report issued by companies involved in trading securities and, and these companies are likely to provide or for a variety of financial services. Our affiliates, or individuals may be published in this report prior to use or understand the information. The directional antenna information of cell phone jammer should be described in details.
Thursday, January 12, 2012
The cell phone jammer system for school
In this case, including Austria, Sweden, Emporia and Doro handset manufacturers, including small-scale were given a business development opportunities. Doro latest survey results show that, in the current developed countries, the majority of elderly people over 65 have a cell phone. In fact, Emporia from several years ago began to focus on the production of mobile phones for the elderly, because the CEO Feller (AlbertFellner) mother always encountered in the use of cell phone problems. Feller said: "She is always in trouble when using the cell phone every two weeks I need to explain to her re-use of a cell phone and finally I chose to give up, I assured her that she will use a production cell phone. " The total effective emission power of the singlecell phone jammeris 10W.
The project leader IBM Chieko Asakawa also have the same personal experience. Because she is a blind, so she received in the last century of the 1990s largely confined to the role of the first cell phone call, SMS or other features which can not be used. TCL Group, TCL 470 million in 2009 net profit turnaround multimedia (Reporter Wang Xiao Xing) TCL Group announced yesterday its annual report 2009: During the reporting period, TCL Group, an international mergers and acquisitions to achieve after the first positive growth in revenue, operating income of 44.295 billion yuan, of which sales of 42.919 billion yuan, up 14.86%; net profit of 4.7 billion yuan, up 213.39 percent. The working mode ofcell phone jammeris intensive and bidirectional frequency sweeping.
From specific industries, 2009 TCL multimedia services to achieve industrial upgrading and transformation, and truly in profitability, as of December 31, 2009 TCL Multimedia turnover of 30.343 billion, an increase of 17.7%, net profit of HK $ 397 million, up HK $ 665 million to improve. At the same time, communication (02618.HK) also announced, TCL 2009 TCL Communication fiscal year turnover of 4.36 billion yuan, compared with 2008 was reduced by 4%, net profit of 23 million yuan, 19.26% over last year back. But the second half of the company's sales grew 59% rise. Which TCL Communication 2009 total sales of handsets and accessories to reach 16.1 million, compared with 18% growth in 2008. 23 ZTE Vodafone in Germany set up joint R & D laboratories. Three shifts of manufacturingcell phone jammercan ensure the timely delivery ofcell phone jammer.
Reporters learned yesterday from ZTE, Vodafone's German subsidiary has jointly operated "Test and Innovation Center" in Dusseldorf, Germany R & D laboratories, in Europe aimed at strengthening local R & D and testing capabilities, and for the company in Europe to further lay the foundation for long-term development. In 2005, ZTE Communications industry centers in Europe, Düsseldorf, Germany to establish the headquarters of the company's key customers and adjacent to Vodafone. It is understood that in the past two years, ZTE has been successful in the Innovation Center, including SDR, including a number of innovative mobile communications technology and mobile terminal testing, and decided to set up long-term in local research and testing center. ZTE said the company will benefit from the center of excellence long-term experimental conditions, first-class infrastructure and professional support. Vice Chief Engineer is directly in charge of process, manufacture and repair of cell phone jammer.
"ZTE has been R & D strategy is not only R & D center in China headquarters, a place close to the customers but also increase in R & D capabilities, the center is the second in France after Poitiers and Kista, Sweden's third in the European R & D Center" ZTE Vodafone chief operating officer Michael Stückmann Office Director, said, "Dusseldorf Research Laboratory services will become ZTE's major operators in the European technology platform, the company will look at here for the whole European market broadband technology to support customer deployment of new services. " Gartner: 2010 touch-screen mobile device sales will grow 97%. According to Gartner, by 2010 global sales of touchscreen mobile devices will exceed 362 million, with 2009 sales of 184 million, an increase of 96.8%. The workshop should implement the self inspection of cell phone jammer.
The project leader IBM Chieko Asakawa also have the same personal experience. Because she is a blind, so she received in the last century of the 1990s largely confined to the role of the first cell phone call, SMS or other features which can not be used. TCL Group, TCL 470 million in 2009 net profit turnaround multimedia (Reporter Wang Xiao Xing) TCL Group announced yesterday its annual report 2009: During the reporting period, TCL Group, an international mergers and acquisitions to achieve after the first positive growth in revenue, operating income of 44.295 billion yuan, of which sales of 42.919 billion yuan, up 14.86%; net profit of 4.7 billion yuan, up 213.39 percent. The working mode ofcell phone jammeris intensive and bidirectional frequency sweeping.
From specific industries, 2009 TCL multimedia services to achieve industrial upgrading and transformation, and truly in profitability, as of December 31, 2009 TCL Multimedia turnover of 30.343 billion, an increase of 17.7%, net profit of HK $ 397 million, up HK $ 665 million to improve. At the same time, communication (02618.HK) also announced, TCL 2009 TCL Communication fiscal year turnover of 4.36 billion yuan, compared with 2008 was reduced by 4%, net profit of 23 million yuan, 19.26% over last year back. But the second half of the company's sales grew 59% rise. Which TCL Communication 2009 total sales of handsets and accessories to reach 16.1 million, compared with 18% growth in 2008. 23 ZTE Vodafone in Germany set up joint R & D laboratories. Three shifts of manufacturingcell phone jammercan ensure the timely delivery ofcell phone jammer.
Reporters learned yesterday from ZTE, Vodafone's German subsidiary has jointly operated "Test and Innovation Center" in Dusseldorf, Germany R & D laboratories, in Europe aimed at strengthening local R & D and testing capabilities, and for the company in Europe to further lay the foundation for long-term development. In 2005, ZTE Communications industry centers in Europe, Düsseldorf, Germany to establish the headquarters of the company's key customers and adjacent to Vodafone. It is understood that in the past two years, ZTE has been successful in the Innovation Center, including SDR, including a number of innovative mobile communications technology and mobile terminal testing, and decided to set up long-term in local research and testing center. ZTE said the company will benefit from the center of excellence long-term experimental conditions, first-class infrastructure and professional support. Vice Chief Engineer is directly in charge of process, manufacture and repair of cell phone jammer.
"ZTE has been R & D strategy is not only R & D center in China headquarters, a place close to the customers but also increase in R & D capabilities, the center is the second in France after Poitiers and Kista, Sweden's third in the European R & D Center" ZTE Vodafone chief operating officer Michael Stückmann Office Director, said, "Dusseldorf Research Laboratory services will become ZTE's major operators in the European technology platform, the company will look at here for the whole European market broadband technology to support customer deployment of new services. " Gartner: 2010 touch-screen mobile device sales will grow 97%. According to Gartner, by 2010 global sales of touchscreen mobile devices will exceed 362 million, with 2009 sales of 184 million, an increase of 96.8%. The workshop should implement the self inspection of cell phone jammer.
The cell phone jammer system will consider the students
The next 2-3 years in the terminal, the mobile Internet value-added business will usher in rapid market development and competition pattern of the reshuffle, which will Datang Telecom has brought rare opportunities for development. Meanwhile, the "Experience China" as the core of things become the 3G is the next after the development of information industry hot spot, and in the next 5-10 years to create one trillion industrial scale, it will directly affect the scope of our more production and every aspect of life. Present in many aspects of the networking industry and products areas, such as RFID, M2M terminals, video surveillance and so on. Datang Telecom already has a good industrial base, which is Datang Telecom started in the early stages of the networking industry seize this golden opportunity to create a solid foundation for development, bringing a rare opportunity. This type of cell phone jammerhas a little frequency drift.
To this end, Datang Telecom will focus on the established development strategy, and study of things Datang Telecom and promote the overall development of industrial layout planning, organizational development of the overall solution to promote industry collaboration and integration, closely around the mobile Internet industry layout, object around the networking industry layout, providing quick transition from the application of products to provide strategic transformation. Datang Telecom in 2010, said the work of thinking through which information on the Datang Telecom industry trends, market environment and competitive landscape, and Datang Telecom core competencies and internal resources in-depth analysis and research, Datang Telecom established the overall development strategy. Datang Telecom in 2010 the overall business idea is: the mobile Internet and things around, focused on building "great end to increase the service" industries. The factory inspection and acceptance personnel should sign the report ofcell phone jammerifcell phone jammeris qualified.
For individual customers, industrial customers, government and enterprise customers to extend and expand the applications and services to accelerate the implementation of the strategy to shift the client, by enhancing the ability to enhance the overall chain profitability, competitiveness and sustainability; In addition, Datang Telecom continue to comprehensively promote the refinement of management, financial management, human resources management and supply chain management as the core, continue to reduce operating costs; to internal risk control as the core, the construction and implementation of internal control system, improve the risk prevention mechanism, enhance the level of risk prevention; full use of investment and financing tools to further improve the asset structure of Datang Telecom, the leading industry by investing in accelerating the development and enhance overall profitability. IBM started developing two years old and want to push education on March 10 with cell phone, according to Reuters. Indices and technologies of cell phone jammer are of the world advanced level.
U.S. IT giant IBM has begun a two-year research project to manufacture suitable for the elderly and less educated consumers the convenience of mobile phones. With Europe, Japan and the United States and other developed countries, growth has been nearly stagnant market, the focus of the entire wireless industry began to shift to older age groups. The present case, most elderly people consider that there is no cell phone in the case of normal life, while the other part of the older people consider themselves not to use the phone. IBM Corp. on Wednesday announced the project in the developed software, publicly available through open-source approach, while others in the development process of the material produced by the government and enterprises will also open. Reported, IBM is with the Indian National Academy of Design (NationalInstituteofDesignofIndia) and University of Tokyo (TokyoUniversity) jointly launched the research project. Here is the inspection items and technical requirements of cell phone jammer.
Industry analysts said, IBM's project to meet the current needs of the market. CCSInsight analyst Wood (BenWood) said: "With the aging of Europe and North America, the growing phenomenon of the market demand for a particular cell phone will become very urgent, if cell phone manufacturers want to seize this market, then they must The business model for their own certain adjustments. "22 At present, including Nokia, Samsung, including the major handset manufacturers have begun intentionally producing buttons, simple design of mobile products to meet the needs of older persons. However, these cell phone manufacturers and specialized marketing activities for the elderly. cell phone jammerwill not interfere with other electronic equipments to ensure the security of the above special locations.
To this end, Datang Telecom will focus on the established development strategy, and study of things Datang Telecom and promote the overall development of industrial layout planning, organizational development of the overall solution to promote industry collaboration and integration, closely around the mobile Internet industry layout, object around the networking industry layout, providing quick transition from the application of products to provide strategic transformation. Datang Telecom in 2010, said the work of thinking through which information on the Datang Telecom industry trends, market environment and competitive landscape, and Datang Telecom core competencies and internal resources in-depth analysis and research, Datang Telecom established the overall development strategy. Datang Telecom in 2010 the overall business idea is: the mobile Internet and things around, focused on building "great end to increase the service" industries. The factory inspection and acceptance personnel should sign the report ofcell phone jammerifcell phone jammeris qualified.
For individual customers, industrial customers, government and enterprise customers to extend and expand the applications and services to accelerate the implementation of the strategy to shift the client, by enhancing the ability to enhance the overall chain profitability, competitiveness and sustainability; In addition, Datang Telecom continue to comprehensively promote the refinement of management, financial management, human resources management and supply chain management as the core, continue to reduce operating costs; to internal risk control as the core, the construction and implementation of internal control system, improve the risk prevention mechanism, enhance the level of risk prevention; full use of investment and financing tools to further improve the asset structure of Datang Telecom, the leading industry by investing in accelerating the development and enhance overall profitability. IBM started developing two years old and want to push education on March 10 with cell phone, according to Reuters. Indices and technologies of cell phone jammer are of the world advanced level.
U.S. IT giant IBM has begun a two-year research project to manufacture suitable for the elderly and less educated consumers the convenience of mobile phones. With Europe, Japan and the United States and other developed countries, growth has been nearly stagnant market, the focus of the entire wireless industry began to shift to older age groups. The present case, most elderly people consider that there is no cell phone in the case of normal life, while the other part of the older people consider themselves not to use the phone. IBM Corp. on Wednesday announced the project in the developed software, publicly available through open-source approach, while others in the development process of the material produced by the government and enterprises will also open. Reported, IBM is with the Indian National Academy of Design (NationalInstituteofDesignofIndia) and University of Tokyo (TokyoUniversity) jointly launched the research project. Here is the inspection items and technical requirements of cell phone jammer.
Industry analysts said, IBM's project to meet the current needs of the market. CCSInsight analyst Wood (BenWood) said: "With the aging of Europe and North America, the growing phenomenon of the market demand for a particular cell phone will become very urgent, if cell phone manufacturers want to seize this market, then they must The business model for their own certain adjustments. "22 At present, including Nokia, Samsung, including the major handset manufacturers have begun intentionally producing buttons, simple design of mobile products to meet the needs of older persons. However, these cell phone manufacturers and specialized marketing activities for the elderly. cell phone jammerwill not interfere with other electronic equipments to ensure the security of the above special locations.
Wednesday, January 11, 2012
High Power Cell Phone Jammer Scrambler
High Power Cell Phone Jammer Scrambler (CDMA / GSM / 3G / DCS PHS) ATJ010
A new type of cell phone jammer scrambler will be introduced as follows. The name of this kind of cell phone jammer is high power cell phone jammer scrambler and the model is ATJ001. This kind of cell phone jammer is normally used to shield signal of CDMA / GSM / 3G / DCS&PHS. Actually it is a widely used type of cell phone jammer which has strong and powerful functions so that it can act quickly and extremely effectively.
This kind of cell phone jammer has a tiny and handy remote to wirelessly and remotely control power on or off of the cell phone jammer. Therefore, the customer can use the remote to conveniently switch the cell phone jammer on or off. The operation of the remote is very easy. The client only needs to press the lock button and then the cell phone jammer will be deactivated. If the client presses the unlock button, the cell phone jammer will be activated.
The antenna of the cell phone jammer has the error-proof design. The antenna and antenna port have the corresponding letters. The customer only needs to connect the antenna to the cell phone jammer according to the corresponding letters. It is very easy for the customer to master the assemble operation of the cell phone jammer. There is no need for the customer to have much basic knowledge about the cell phone jammer.
The cell phone jammer is also equipped with the car charger so that the customer can charge the cell phone jammer easily and conveniently in the car. There exists a button at the back of the host of the cell phone jammer, which has such two options as the local and remote. If the customer turns the button to the local side, the cell phone jammer can not be remotely controlled by the wireless remote. Otherwise, the cell phone jammer can be remotely controlled.
The cell phone jammer is equipped with four omnidirectional antennae which makes the cell phone jammer shield in the whole directions within the shielding range. It is better not to place the cell phone jammer in high voltage and high magnetism locations. The cell phone jammer will not do harm to the human body or other electronic equipments.
Technical parameters of cell phone jammer:
Jamming Signal Frequency:
- CDMA: 850-894 MHz
- GSM: 925-960 MHz
- DCS PHS: 1805-1990 MHz
- 3G: 2110-2170 MHz
Antenna: 4 pieces of omnidirectional antennae
Effective Range: up to 40 meter Radius (which is dependent on the cell phone network strength and whether there is the obstruction).
Power Source: Wall Plug
Power Supply: AC100-240V
A new type of cell phone jammer scrambler will be introduced as follows. The name of this kind of cell phone jammer is high power cell phone jammer scrambler and the model is ATJ001. This kind of cell phone jammer is normally used to shield signal of CDMA / GSM / 3G / DCS&PHS. Actually it is a widely used type of cell phone jammer which has strong and powerful functions so that it can act quickly and extremely effectively.
This kind of cell phone jammer has a tiny and handy remote to wirelessly and remotely control power on or off of the cell phone jammer. Therefore, the customer can use the remote to conveniently switch the cell phone jammer on or off. The operation of the remote is very easy. The client only needs to press the lock button and then the cell phone jammer will be deactivated. If the client presses the unlock button, the cell phone jammer will be activated.
The antenna of the cell phone jammer has the error-proof design. The antenna and antenna port have the corresponding letters. The customer only needs to connect the antenna to the cell phone jammer according to the corresponding letters. It is very easy for the customer to master the assemble operation of the cell phone jammer. There is no need for the customer to have much basic knowledge about the cell phone jammer.
The cell phone jammer is also equipped with the car charger so that the customer can charge the cell phone jammer easily and conveniently in the car. There exists a button at the back of the host of the cell phone jammer, which has such two options as the local and remote. If the customer turns the button to the local side, the cell phone jammer can not be remotely controlled by the wireless remote. Otherwise, the cell phone jammer can be remotely controlled.
The cell phone jammer is equipped with four omnidirectional antennae which makes the cell phone jammer shield in the whole directions within the shielding range. It is better not to place the cell phone jammer in high voltage and high magnetism locations. The cell phone jammer will not do harm to the human body or other electronic equipments.
Technical parameters of cell phone jammer:
Jamming Signal Frequency:
- CDMA: 850-894 MHz
- GSM: 925-960 MHz
- DCS PHS: 1805-1990 MHz
- 3G: 2110-2170 MHz
Antenna: 4 pieces of omnidirectional antennae
Effective Range: up to 40 meter Radius (which is dependent on the cell phone network strength and whether there is the obstruction).
Power Source: Wall Plug
Power Supply: AC100-240V
GPS Jammer and Cell Phone Jammer
Combination of GPS Jammer and Cell Phone Jammer
Here will introduce a special type of signal jammer which combines the cell phone jammer and GPS jammer, which means that this kind of signal jammer have the function of both cell phone jammer and GPS jammer. We specifically manufacture and sell this kind of signal jammer according to requirements of many customers to meet different use needs in different occasions.
The first and biggest characteristic of this kind of signal jammer is that it can shield the cell phone signal and GPS signal at the same time. Therefore, it will be very convenient for the customer to use the same signal jammer in different locations for different purpose, including jamming the cell phone signal and shielding GPS signal. Actually, the multiple functions of this kind of signal jammer are the selling point which can attract more customers.
The high power is the other characteristic of the signal jammer. The total output power of this kind of cell phone jammer is 3.5W so that this kind of signal jammer can jam all nearby cell phone signals and GPS signals within a wide range. The shielding range of this kind of signal jammer can reach 25m at most, which means that all the cell phones and GPS can not work normally within this shielding range as long as the signal jammer works.
The shielding radius of this kind of signal jammer is 25m. The value of 25m is got under the condition that the local signal density is not too strong, which means the best shielding range is 25m. Actually, the shielding range is dependent on the local signal strength. If the signal strength is too strong, the shielding radius will be decreased correspondingly. Still, the jamming radius is big enough to meet different needs of shielding cell phone signal and GPS signal.
We strongly recommend this new type of signal jammer for our customers. All in all, this kind of signal jammer has the aesthetic appearance, strict and accurate parameter, high and perfect performance and super high quality. Last, but not least, this kind of signal jammer owns the reasonable and attractive price. Therefore, it is really a good cell phone jammer of the high cost performance.
Here will introduce a special type of signal jammer which combines the cell phone jammer and GPS jammer, which means that this kind of signal jammer have the function of both cell phone jammer and GPS jammer. We specifically manufacture and sell this kind of signal jammer according to requirements of many customers to meet different use needs in different occasions.
The first and biggest characteristic of this kind of signal jammer is that it can shield the cell phone signal and GPS signal at the same time. Therefore, it will be very convenient for the customer to use the same signal jammer in different locations for different purpose, including jamming the cell phone signal and shielding GPS signal. Actually, the multiple functions of this kind of signal jammer are the selling point which can attract more customers.
The high power is the other characteristic of the signal jammer. The total output power of this kind of cell phone jammer is 3.5W so that this kind of signal jammer can jam all nearby cell phone signals and GPS signals within a wide range. The shielding range of this kind of signal jammer can reach 25m at most, which means that all the cell phones and GPS can not work normally within this shielding range as long as the signal jammer works.
The shielding radius of this kind of signal jammer is 25m. The value of 25m is got under the condition that the local signal density is not too strong, which means the best shielding range is 25m. Actually, the shielding range is dependent on the local signal strength. If the signal strength is too strong, the shielding radius will be decreased correspondingly. Still, the jamming radius is big enough to meet different needs of shielding cell phone signal and GPS signal.
We strongly recommend this new type of signal jammer for our customers. All in all, this kind of signal jammer has the aesthetic appearance, strict and accurate parameter, high and perfect performance and super high quality. Last, but not least, this kind of signal jammer owns the reasonable and attractive price. Therefore, it is really a good cell phone jammer of the high cost performance.
Tuesday, January 10, 2012
Cell phone jammer is recommended to be installed
Termination of the cooperation between SP need to ensure a smooth transfer of customer information. China Mobile will depend on the specific situation, consider the agreement to lift the withdrawal of the SP to provide a month grace period. During this period, in addition to the relevant SP should continue to provide services to its customers, the SP must be conditional on its prominent position on the portal will soon stop publishing the notice Monternet gaming business services, and continue to do with China Mobile customer service related work. Lifting of a cooperation agreement, China Mobile will be allocated back to the original co-SP service code and enterprise code and other network resources, six months after the cold period, No. redistribution. The customer asks for morecell phone jammerfor tryout.
Since the exit date, China Mobile is no longer accepted in principle, be out within one year of the SP re-submit applications for new cooperation. China Mobile to provide co-generation of SP paid billing, service charges on behalf of and in accordance with China Mobile Monternet business network platform features, billing system, business process development Monternet service billing, settlement, reconciliation principles and processes . Settlement: the provincial mobile access to business services companies to provide games with the SP for clearing. Accounting principle: only authorized users and customized business (service subscription relationship that exists) will be able to charge. Billing based on: the game business is based on China Mobile's billing platform, then a single billing. At first, the inspection group performs the visual inspection of cell phone jammer.
Billing responsibility: China Mobile Communication Co., Ltd. (hereinafter referred to as China Mobile) and Monternet game business service providers (hereinafter referred to as SP), jointly responsible for the generation of user information costs, China Mobile to ensure that billing system to work, and system failures responsible for billing errors generated; SP must be in strict accordance with the approval by China Mobile's billing to the user logic and standard billing rates, and breach of agreement by the SP and the information generated by management practices such as cost responsibility. Billing cycle: pay-per-month subscription service billing month; monthly business each month beginning at 0:00 on the 1st single trigger, then monthly. A basis for settlement: the settlement is based on the games business business support China Mobile's billing system to provide a single department. The visual inspection ofcell phone jammeris not easy to perform.
Clearing point: Monternet game business point of access to the settlement province Mobile. Settlement costs: the costs incurred by the game operations, including communications and information-based fee. Based communications: the wireless communication network using the user costs incurred by the China Mobile standard, by China Mobile to charge the customers, not to participate in settlement. Information Fee: users use the SP to provide application services and costs incurred by the China Mobile on behalf of the SP to charge the customers. Both the proportion of income determined according to business cooperation mode. Monternet settlement payments in the whole network business data services and other related work involving management, business support systems and financial sectors three departments. Of which: data service management: the SP as a co-management of the company's unified interface department, in the settlement payment process. The daily use ofcell phone jammeris always emphasized.
According to SP credit rating and breach of contract and other closing conditions to confirm whether SP; and is responsible for publishing business reporting data to the SP. Business Support Systems: responsible for the settlement payment in the settlement process, reconciliation, invoice collection, payment approval and other concrete work; consultant email: bandc_data@chinamobile.com. Finance Department: Responsible for the final payment to the SP. China Mobile's business support system to the department in accordance with the monthly invoice and receipt of the invoice month, check the SP's settlement after qualifying for the SP to meet the closing conditions for settlement. Specific settlement process is as follows: According to the business of the whole network Monternet billing, settlement, audit rules, business support systems division at the beginning of each month off work to complete Monternet business, generate statements. The daily use of cell phone jammer needs more attention.
Since the exit date, China Mobile is no longer accepted in principle, be out within one year of the SP re-submit applications for new cooperation. China Mobile to provide co-generation of SP paid billing, service charges on behalf of and in accordance with China Mobile Monternet business network platform features, billing system, business process development Monternet service billing, settlement, reconciliation principles and processes . Settlement: the provincial mobile access to business services companies to provide games with the SP for clearing. Accounting principle: only authorized users and customized business (service subscription relationship that exists) will be able to charge. Billing based on: the game business is based on China Mobile's billing platform, then a single billing. At first, the inspection group performs the visual inspection of cell phone jammer.
Billing responsibility: China Mobile Communication Co., Ltd. (hereinafter referred to as China Mobile) and Monternet game business service providers (hereinafter referred to as SP), jointly responsible for the generation of user information costs, China Mobile to ensure that billing system to work, and system failures responsible for billing errors generated; SP must be in strict accordance with the approval by China Mobile's billing to the user logic and standard billing rates, and breach of agreement by the SP and the information generated by management practices such as cost responsibility. Billing cycle: pay-per-month subscription service billing month; monthly business each month beginning at 0:00 on the 1st single trigger, then monthly. A basis for settlement: the settlement is based on the games business business support China Mobile's billing system to provide a single department. The visual inspection ofcell phone jammeris not easy to perform.
Clearing point: Monternet game business point of access to the settlement province Mobile. Settlement costs: the costs incurred by the game operations, including communications and information-based fee. Based communications: the wireless communication network using the user costs incurred by the China Mobile standard, by China Mobile to charge the customers, not to participate in settlement. Information Fee: users use the SP to provide application services and costs incurred by the China Mobile on behalf of the SP to charge the customers. Both the proportion of income determined according to business cooperation mode. Monternet settlement payments in the whole network business data services and other related work involving management, business support systems and financial sectors three departments. Of which: data service management: the SP as a co-management of the company's unified interface department, in the settlement payment process. The daily use ofcell phone jammeris always emphasized.
According to SP credit rating and breach of contract and other closing conditions to confirm whether SP; and is responsible for publishing business reporting data to the SP. Business Support Systems: responsible for the settlement payment in the settlement process, reconciliation, invoice collection, payment approval and other concrete work; consultant email: bandc_data@chinamobile.com. Finance Department: Responsible for the final payment to the SP. China Mobile's business support system to the department in accordance with the monthly invoice and receipt of the invoice month, check the SP's settlement after qualifying for the SP to meet the closing conditions for settlement. Specific settlement process is as follows: According to the business of the whole network Monternet billing, settlement, audit rules, business support systems division at the beginning of each month off work to complete Monternet business, generate statements. The daily use of cell phone jammer needs more attention.
The prison cell phone jammer shielding need analysis andsolution
15 per month, last month, according to analysis of operational data management and business assessment to determine the table last month and the need to exit the business inventory; monthly on the 20th, to inform the business partners involved in assessing the results of exit; business partners of the month assessment out of doubt, the month before 23 can be raised in SIMS doubt, and should additional data to prove the point; based on partner feedback to confirm the final list of offline business; times 1, 11, 21, quit the business effect, remove the appraisal out of business accounting data, delete data service platform in the business. The school has the strict requirements for using of the cell phone so the school needs cell phone jammer.
Ensure operational effectiveness, the game service platform while the cell phone network operators limit the number of 20. When the game service platform in the formal charge state of the mobile gaming more than 20, the monthly relative assessment, the last two months, and businesses operating below the basic information on the cost of fee income (6000 dollars) when the exit examination. Exit examination after two-month grace period, the buffer is set at the end of the business during the period. 15 per month, last month, according to analysis of operational data management and business assessment to determine the table last month and the need to exit the business inventory; monthly on the 20th, to inform the business partners involved in assessing the results of exit; business partners of the month assessment out of doubt, the month before 23 can be raised in SIMS doubt, and should additional data to prove the point. Morecell phone jammerof better quality will be used in the examination.
Based on partner feedback to confirm the final list of offline business; mobile games out of first two-month grace period, SP must continue to provide services and publish the relevant notice, the first three months of operations out of 1, entered into force, remove the appraisal out of business accounting data, delete data service platform in the business. Partners can take the initiative to apply for services out of China Mobile. If the application is out of business for online games, partners should be in business after exit from the platform to continue to provide networking services as a two-month grace period. In this buffer period, except partners should continue to provide services to its customers, partners, conditional on its portal must be prominently published on the mobile Internet services will stop the announcement, and with China Mobile to do work related to customer service. The teacher told the student that the school equips withcell phone jammer.
SP due to the development needs of the company offered to end their cooperation. SP must have at least one month in advance on the SIMS application to China Mobile. During this period the SP should continue to provide services to its customers, while China Mobile to provide customer order business information; SP must be in its prominent position on the portal will soon stop publishing the notice Monternet gaming business services, and continue to do related with China Mobile customer service work. SP out of business for breach of contract and other causes or assess all business exit off the assembly line, such as non-business through the assessment of the month, then notify the SP out of the month, next month to take effect. At the same time, were all out in the business of the month, China Mobile announced by SIMS to the whole network while the SP out of business due to non-termination of the cooperation with the SP. The centralized disposition of cell phone jammer will be done next month.
If the SP as a material breach or default led to a continuous negative credit score below 20 points, then under "SP Monternet mobile Internet business credit score management approach" to implement default exit. China Mobile provided by SIMS on a variety of contact information of the SP, are unable to get in touch with the SP, in cooperation with the SP after the expiry of the agreement, China Mobile will be announced on SIMS by www.monternet.com release information, asked the SP initiative and renewed contact with China Mobile agreement. Such as notification issued within 30 days from the date of the SP moved to China could not be renewed, no contract is that the SP will end cooperation. Ifcell phone jammeris nonconforming, it should be discarded.
Ensure operational effectiveness, the game service platform while the cell phone network operators limit the number of 20. When the game service platform in the formal charge state of the mobile gaming more than 20, the monthly relative assessment, the last two months, and businesses operating below the basic information on the cost of fee income (6000 dollars) when the exit examination. Exit examination after two-month grace period, the buffer is set at the end of the business during the period. 15 per month, last month, according to analysis of operational data management and business assessment to determine the table last month and the need to exit the business inventory; monthly on the 20th, to inform the business partners involved in assessing the results of exit; business partners of the month assessment out of doubt, the month before 23 can be raised in SIMS doubt, and should additional data to prove the point. Morecell phone jammerof better quality will be used in the examination.
Based on partner feedback to confirm the final list of offline business; mobile games out of first two-month grace period, SP must continue to provide services and publish the relevant notice, the first three months of operations out of 1, entered into force, remove the appraisal out of business accounting data, delete data service platform in the business. Partners can take the initiative to apply for services out of China Mobile. If the application is out of business for online games, partners should be in business after exit from the platform to continue to provide networking services as a two-month grace period. In this buffer period, except partners should continue to provide services to its customers, partners, conditional on its portal must be prominently published on the mobile Internet services will stop the announcement, and with China Mobile to do work related to customer service. The teacher told the student that the school equips withcell phone jammer.
SP due to the development needs of the company offered to end their cooperation. SP must have at least one month in advance on the SIMS application to China Mobile. During this period the SP should continue to provide services to its customers, while China Mobile to provide customer order business information; SP must be in its prominent position on the portal will soon stop publishing the notice Monternet gaming business services, and continue to do related with China Mobile customer service work. SP out of business for breach of contract and other causes or assess all business exit off the assembly line, such as non-business through the assessment of the month, then notify the SP out of the month, next month to take effect. At the same time, were all out in the business of the month, China Mobile announced by SIMS to the whole network while the SP out of business due to non-termination of the cooperation with the SP. The centralized disposition of cell phone jammer will be done next month.
If the SP as a material breach or default led to a continuous negative credit score below 20 points, then under "SP Monternet mobile Internet business credit score management approach" to implement default exit. China Mobile provided by SIMS on a variety of contact information of the SP, are unable to get in touch with the SP, in cooperation with the SP after the expiry of the agreement, China Mobile will be announced on SIMS by www.monternet.com release information, asked the SP initiative and renewed contact with China Mobile agreement. Such as notification issued within 30 days from the date of the SP moved to China could not be renewed, no contract is that the SP will end cooperation. Ifcell phone jammeris nonconforming, it should be discarded.
Indices and technologies of cell phone jammer
Partners in the assessment to provide violence, pornographic, reactionary and other illegal content of the game. If the market beta stage following conditions are met, then the suspension of the mobile games market beta for three months: the contents of the game and can not be serious irregularities timely rectification; game serious BUG or operating error that causes a lot of user complaints; customer service quality over low, not up to standard. According to the type of game operations, game testing can be divided into the following categories: stand-alone games, online games and mobile graphics games (WAP games) test. Detailed description of the test see "Annex 1: Test game business management practices." The marketing department provides several programs for the promotion activity of cell phone jammer.
Stand-alone game content changes will not be accepted. SP in the game business platform in the market beta or the official status of the cell phone billing on-line games can make the necessary upgrades, the game version of the upgrade process upgrades the game to be with reference to declare. Photo Game (WAP games) change of address can be submitted by SIMS, the effect after approval by the administrator. Cell phone network upgrade process is as follows: Version upgrade principles: beta / official billing period BUG amended; beta / official billing period of the normal content updates, such as open copy of the character level cap increase, double the experience or other special events open and so on; if the version upgrade can not enter the game after a serious BUG large number of complaints as a result of the phenomenon of users. Some staff members give their suggestion about the promotion activity ofcell phone jammer.
The SP is required as this occurs within 24 hours after the rectification of the game, if not solve the problem, the game will pause display, to solve the problem then restore the beta / official billing status, and the deduction of test points; the same cell phone online version upgrade twice the time interval not shorter than a natural week; SP models submitted to expand or submit mobile gaming upgrade, you must ensure that all Adapter model series version of the same package. Version of the upgrade process: SP to upgrade submit mobile gaming application message, the message named as the "online version of the upgrade game name _SP name _ _ Part X minor version upgrade." The price-off sale ofcell phone jammeris only available in this month.
Message to be an upgraded version of the game with all the models fit the package, such as the package fit model series incomplete, you can not upgrade. Operations will be in receipt of the application within 2 working days after the upgrade process upload the package. If the upload process can not occur due to packaging error uploading the case, then this application is invalid, SP can go through a full week and resubmit. Exit to exit the business, including breach of contract, and SP initiative to apply for exit examination exit. Produced by SP illegal business out of the process is as follows: default offline business to conduct business first shield; times 1st official line, and delete the billing data, delete data in the portal menu operations; out of business by the SP in the month before 1 implementation of the user informed. The company will prepare a document to describe the new sales strategy of cell phone jammer.
To further enhance the brand image Monternet, build Monternet boutique operations, to enhance the survival of the fittest Monternet business, business on a monthly basis for the implementation of assessment out of the game management. From business partners after the first seven months of on-line appraisal business start each month according to the first three months of operational data for an assessment. Assessment out of the natural cycle of business on the business out of the frequency of once a month. Who meet the following assessment of indicators of business out of business, will be to achieve business exit: the basic costs of operating the business as a business assessment of fixed targets, information on the basic fee income is less than the cost of business operations, business direct assessment of non-free exit. If a business partner all fit in the total income of less than terminal above 1000 yuan / month, the above business in all types of terminal exit. The company encourages the staff members to give suggestions to expand the marketing channel ofcell phone jammer.
Stand-alone game content changes will not be accepted. SP in the game business platform in the market beta or the official status of the cell phone billing on-line games can make the necessary upgrades, the game version of the upgrade process upgrades the game to be with reference to declare. Photo Game (WAP games) change of address can be submitted by SIMS, the effect after approval by the administrator. Cell phone network upgrade process is as follows: Version upgrade principles: beta / official billing period BUG amended; beta / official billing period of the normal content updates, such as open copy of the character level cap increase, double the experience or other special events open and so on; if the version upgrade can not enter the game after a serious BUG large number of complaints as a result of the phenomenon of users. Some staff members give their suggestion about the promotion activity ofcell phone jammer.
The SP is required as this occurs within 24 hours after the rectification of the game, if not solve the problem, the game will pause display, to solve the problem then restore the beta / official billing status, and the deduction of test points; the same cell phone online version upgrade twice the time interval not shorter than a natural week; SP models submitted to expand or submit mobile gaming upgrade, you must ensure that all Adapter model series version of the same package. Version of the upgrade process: SP to upgrade submit mobile gaming application message, the message named as the "online version of the upgrade game name _SP name _ _ Part X minor version upgrade." The price-off sale ofcell phone jammeris only available in this month.
Message to be an upgraded version of the game with all the models fit the package, such as the package fit model series incomplete, you can not upgrade. Operations will be in receipt of the application within 2 working days after the upgrade process upload the package. If the upload process can not occur due to packaging error uploading the case, then this application is invalid, SP can go through a full week and resubmit. Exit to exit the business, including breach of contract, and SP initiative to apply for exit examination exit. Produced by SP illegal business out of the process is as follows: default offline business to conduct business first shield; times 1st official line, and delete the billing data, delete data in the portal menu operations; out of business by the SP in the month before 1 implementation of the user informed. The company will prepare a document to describe the new sales strategy of cell phone jammer.
To further enhance the brand image Monternet, build Monternet boutique operations, to enhance the survival of the fittest Monternet business, business on a monthly basis for the implementation of assessment out of the game management. From business partners after the first seven months of on-line appraisal business start each month according to the first three months of operational data for an assessment. Assessment out of the natural cycle of business on the business out of the frequency of once a month. Who meet the following assessment of indicators of business out of business, will be to achieve business exit: the basic costs of operating the business as a business assessment of fixed targets, information on the basic fee income is less than the cost of business operations, business direct assessment of non-free exit. If a business partner all fit in the total income of less than terminal above 1000 yuan / month, the above business in all types of terminal exit. The company encourages the staff members to give suggestions to expand the marketing channel ofcell phone jammer.
Monday, January 9, 2012
The area of meeting room with cell phone jammer used is small
NFC mobile payment industrial chain can be said to reporters in recent years have seen the largest most complex production chain, and which includes the chip and terminal vendors, mobile operators, banks, content providers, third-party financial institutions, card reader equipment commercial and other links. The mobile operators and banks in different scenarios were the leading role, were led by their own chain of related industries, and therefore have not received benefits. Therefore, mobile operators and banks consider mobile payments is not the same as the starting point, mobile operators want to pay on the cell phone SIM card. The management system ofcell phone jammercontains the detector.
Because they manage all the SIM card is a "child"; while banks want the cell phone to the SIM card has nothing to do with the payment, so they are not carriers of the control. In this case, it comes to business model, we are concerned about the money I should not be into your pockets. However, we see that after two years of the collision, the two sides have begun to realize that we should collaborate. This is a welcome change. Reporters also learned that last year China Unicom to do a series based on NFC mobile payment standard, the Consortium also involved. However, how the interests of the chain distribution of NFC mobile payment is still the biggest problem on the chain. The customer wants to visit thecell phone jammerworkshop.
Second, there is no participation and the development of international standards. NFC mobile payment industry in a lot of standardization work, and technical issues related to chip manufacturers in the international arena by the "NFC Forum" and other leading standards organizations, have been gradually introduced a number of standards and norms. The reporter learned that our work in this area are relatively backward, operators, banks have not added to the NFC related to the various standards organizations. Currently, the "NFC Forum" is just the introduction of standard attention and follow-up, no voice and contribute to the main patent. The visit of cell phone jammerworkshop also include the visit of technical group office.
Intellectual property is a double edged sword, did not understand the future of patent fees, China's mobile operators and banks will not invest too much easily. Domestic mobile payment industry to grow, but also must have their own patented technology, so the chain can have confidence and grow. Third, the main application. While some countries in the NFC cell phone applications to carry out a number of pilot applications, but mobile car wash to pay fees, fast food fast-food restaurants to pay settlement charges and to the mall business paradigm is not suitable for China. The United States has more than 80,000 businesses in 40 installed in more than one million NFC reader, and China's fast-food restaurants and the mall do not have these devices. The worker is performing the maintenance process of cell phone jammer.
But our non-contact transport 100 million cards have been issued more than, if the operator can reach a tacit understanding with the public transport system, NFC cell phones and public transportation cards will probably be a combination of breakthrough applications. In short, who will take the lead in NFC mobile payment industrial chain? What are the major patented breakthrough technology that we can? Cross-industry applications where the break start? Who will coordinate the various aspects? These difficulties so that we feel, mobile payment industry in the country molding requires a more lengthy process, coordinating and promoting government will become very important. A new technology is imported forcell phone jammer.
Because they manage all the SIM card is a "child"; while banks want the cell phone to the SIM card has nothing to do with the payment, so they are not carriers of the control. In this case, it comes to business model, we are concerned about the money I should not be into your pockets. However, we see that after two years of the collision, the two sides have begun to realize that we should collaborate. This is a welcome change. Reporters also learned that last year China Unicom to do a series based on NFC mobile payment standard, the Consortium also involved. However, how the interests of the chain distribution of NFC mobile payment is still the biggest problem on the chain. The customer wants to visit thecell phone jammerworkshop.
Second, there is no participation and the development of international standards. NFC mobile payment industry in a lot of standardization work, and technical issues related to chip manufacturers in the international arena by the "NFC Forum" and other leading standards organizations, have been gradually introduced a number of standards and norms. The reporter learned that our work in this area are relatively backward, operators, banks have not added to the NFC related to the various standards organizations. Currently, the "NFC Forum" is just the introduction of standard attention and follow-up, no voice and contribute to the main patent. The visit of cell phone jammerworkshop also include the visit of technical group office.
Intellectual property is a double edged sword, did not understand the future of patent fees, China's mobile operators and banks will not invest too much easily. Domestic mobile payment industry to grow, but also must have their own patented technology, so the chain can have confidence and grow. Third, the main application. While some countries in the NFC cell phone applications to carry out a number of pilot applications, but mobile car wash to pay fees, fast food fast-food restaurants to pay settlement charges and to the mall business paradigm is not suitable for China. The United States has more than 80,000 businesses in 40 installed in more than one million NFC reader, and China's fast-food restaurants and the mall do not have these devices. The worker is performing the maintenance process of cell phone jammer.
But our non-contact transport 100 million cards have been issued more than, if the operator can reach a tacit understanding with the public transport system, NFC cell phones and public transportation cards will probably be a combination of breakthrough applications. In short, who will take the lead in NFC mobile payment industrial chain? What are the major patented breakthrough technology that we can? Cross-industry applications where the break start? Who will coordinate the various aspects? These difficulties so that we feel, mobile payment industry in the country molding requires a more lengthy process, coordinating and promoting government will become very important. A new technology is imported forcell phone jammer.
Subscribe to:
Posts (Atom)