How to use the phone in the harsh climatic conditions?

The standby time is the continuous usage time of battery in the mobile phone standby mode. Can also be interpreted completely full of power for mobile phones, do not call, do not shut down the standby mode, the battery can be maintained between the low-battery warning appears on its own consumption has been. Standby current consumption is relatively small, almost nothing to do with the network, a few mA current consumption according to different models, ranging from tens of mA. Standby time depends on the size of the current consumption of the capacity of the battery and cell phone. The standby time of the algorithm as follows: mobile phone battery capacity / standby operating current = standby time. The standby time is a complex issue, it depends on the battery's actual effective capacity, and charge the full extent of inherent and cell phone static standby power consumption. Before brilliant  cell phone jammer comes out of the factory.
Standby time of the main factors in addition to the program is running, as well as the environment, the battery performance, as well as phone quality, for example, if you use the phone in the harsh climatic conditions, the phone will need to increase power to maintain the signal the transmission, thus increasing the power consumption of mobile phone batteries. The phone quality, if the mobile phone batteries and mobile phone contact points dirty or oxidation, mobile phone internal parts of which will have adverse effects, electricity consumption increase will affect the phone's standby time. Overall, however, is mainly affected by the following factors: the main factors of the impact of cell phone talk time cell phone battery, so the right to use the battery is worth the problem of the user note. Of course, the commission condition of brilliant  cell phone jammer is also very important.
Must first clear the phone battery life is not to calculate year-on-year, but to calculate the battery charge and discharge times. Nickel-cadmium batteries are generally charging and discharging of 100-150 times, cast-metal hydride batteries generally can charge and discharge 200-300, lithium generally can charge and discharge 350-700. Each charge and discharge of the battery the longer the interval, the longer the battery life. Therefore, it is best to use the battery on battery power all finished using before charging. If the battery is not sufficient, then the handset talk-time will certainly be lower. Also, the mobile phone used for the first has an active, effective activation of the activity of mobile phones, the battery in the most efficient state, to extend mobile talk time is also an important factor. The area and frequency of brilliant  cell phone jammer  should be taken into account.
Activity of the battery and the temperature of the environment, in general, mobile phone battery can work between -10 ℃ -50 ℃. Therefore, users should try to avoid the phone to work at temperatures higher than 50 ° C or below -10 ° C environment, otherwise the battery life and life will be greatly shortened, of course, it is inevitable that will affect the phone's talk time. Reasonable set, you can also save the power consumption of mobile phones during a call, so as to achieve the purpose of extending phone talk time. Specifically, the setting can be the first phone call mode is optimized for power saving mode, this mode allows the phone not to call the state to reduce the power of the phone transmitting radio waves, to extend the talk time. The user can adjust the installation height of brilliant  phone jammer.