CDMA signal can be shielded by cell phone jammer

CDMA signal can be shielded by cell phone jammer .
PC + ABS: fluidity, strength, good, moderate price. For the vast majority of mobile phone shell, as long as the more optimal structural design, strength is guaranteed. More commonly used GE CYCOLOY C1200HF. PC: high strength, expensive, poor liquidity. Suitable for higher intensity housing (such as the clamshell phones and the shaft with two shells, with no standard slide rail module and slide rail unit has two shells, at present, must be specified with PC material). More commonly used GE LEXAN EXL1414 and Samsung HF1023IM. The application of the material to note the following points: avoid blindly reduce the intensity of risk, and what parts are a result of molding material with PC problems and increased costs; not fully grasp the intensity in the case of mold assessment Tooling Review should clearly tell the mold suppliers, may be produced using T1 PC + ABS products, but does not rule out the time when the strength is not enough follow-up will be the possibility of switching to PC material.
Cell phone molds copy number: 8 to 12 sets, depending on the specific circumstances of specific products, and another button silicone mold; mold core material: NAK80, S136H, imported 738 + heat. Components: two parts connected by rail Slider. There are two ways you can slide the rails, one is in the slide part and host part of the two shells were made on the rails and slide the two shells through the track with each other, in between the shell preload on the spring to enhance the sliding handle. cell phone jammer can control the range of about 40m (diameter).
This slide method for the manufacture of the shell mold need to increase the slider, and the manufacture of high precision track, but the phone can be designed to be thin.Another way is to slide the slide using standard modules, the slide and slide in the slide were fixed part and host part of the two housing. Movement between the two parts and fixed entirely on rails module to complete. Advantage of the manufacturing of the shell does not require the disadvantage of mobile phones will increase the thickness of about 2.7mm or so. cell phone jammer can be installed on various places according to the installation specification needs, including the wall, ceiling and so on.